Use and Care Manual

24
2. Repair or replace damaged parts and
tighten loose screws, nuts or bolts as
necessary or contact an authorised
service centre for repair before using
the product again..
Blade Maintenance
When checking the
blade,wait for a few
moments after switching
the product off, the blade will carry on
moving.
1. Keep the hedging blade clean and
free of debris. Remove trimmings.
2. Keep the hedging blade sharp to
retain a good cutting performance.
Replace a worn or damaged cutting
blade with a new one of the same
type.
3. Lubricate the hedging blades
regularly with oil after each use to
prolong the life span of cutting blade
and product. Apply light machine oil
along the edge of the cutting blade.
4. The blades of this product are high
quality metal and do not need to be
filed. If accidentally, the blade
catches on a metallic surface,
touches a rock or any other hard
object, a small breakage could occur.
If this small breakage does not
impede the blades functioning
correctly, then you can carry on
using the product. If, on the other
hand, the product does not work
properly, then take the product to
customer service center.
5. Blade sharpening must be carried
out by the service dealer. Do not
sharpen the blade yourself. The
blade must be sharpened
guaranteeing the cutting angle and
blade equilibrium. Blade sharpening
carried out by a non expert will
result in the product vibrating and
will eventually cause damages to the
product and usage problems to the
end user.
STORAGE
1. Switch the product off and remove
the battery pack.
2. Follow all aforementioned
maintenance instructions. Clean the
product as described above.
3. Attach the blade sheath
.
4. When not in use, store the product
out of the reach of children.
5. Always unplug the charger from the
power source before storing.
6. Store the product and its accessories
in a clean,dry, frost-free,
well-ventilated place, Keep the
product on a flat surface. Keep away
from corrosive agents such as garden
chemicals and de-icing salts.The ideal
storage temperature is between
10°C(50°F) and 30°C(86°F).
7. We recommend using the original
package for storage or covering the
product with a proper cloth or
enclosure to protect it against dust.
8. Lock up the unit to prevent
unauthorized use or damage.
Disposal of an exhausted
battery pack
To preserve natural resources, please
recycle or dispose of the battery pack
properly. Consult your local waste
authority for information regarding