Use and Care Manual

13
WARNING: Before
assembly, remove the battery pack
from theproduct.
Your hedge trimmer is equipped with a
battery pack, which powers the unit.
The Guard
Placeguard as shown thisFigure, Insert
the 4pcs screws and tighten
The Normal Hedge Trimmer:
1. Open thelock buckle1 of the front
handle.
2. Insert the rear handle into the
opening of front handle.
3. Lock the lock buckle1 of the front
handle.
The Pole Hedge Trimmer:
1. Unlock the lock buckle1 of the front
handle.
2. Insert the fronthexagonal aluminum
pipe joint into the opening of the
front handle.
3. Lock the lock buckle1 of the front
handle.
4. Unlock the lock buckle 2 of telescopic
tube.
5. Insert the rearhandle into the
opening of rear hexagonal aluminum
pipe joint.
6. Lock the lock buckle2 of the
telescopic tube.
The Shoulder Strap
1. Use your thumb or fingers to squeeze
the safety lock piece, put the hook to
the hanging part of the tool.