Use and Care Manual
11
Control Panel
1 AC receptacle 8 Engine switch
2 AC protector 9 Ground (earth) terminal
3 DC receptacle 10 Overload indicator LED (red)
4 USB Port 11 Fuel cock knob
5 Low oil warning LED (yellow) 12 DC protector
6 Economy control switch 13 Choke knob
7 AC pilot LED (green)
The diagrams and pictograms herewith enclosed in this manual are a guide but
not necessarily an exact copy of the actual product.
CONTROL FUNCTION
Engine switch
The engine switch controls the ignition
system.
1. “OFF”: Insert the key provided,
ignition circuit is switched off. The
engine will not run.
2.
“ON”: Ignition circuit is switched on.
The engine runs on its position.
3. “START”: to start the engine.
CAUTION:
Take your hand off the switch
immediately after the engine starts. If the
ignition switch is held down in the “Start”
position longer 5 seconds, it could
damage the starter,