Brochure

112
ACCESSORIES
EUROPE
ASIA
Italy Tel: [phone] email: [e-mail]
United Kingdom Tel: [phone] email: [e-mail]
Singapore Tel: [phone] email: [e-mail]
Taiwan Tel: [phone] email: [e-mail]
AMERICA
USA Tel: [phone] email: [e-mail]
www.aavidthermalloy.com
Sil-Free
TM
1020 is a metal-oxide-filled, silicone-free synthetic grease
specially formulated to enhance heat transfer across the interface
between the semiconductor case and the heat sink without the
migration or contamination associated with silicone-based products.
Dry interface case-to-sink thermal resistance is typically reduced
50% to 75% with proper application of Sil-Free
TM
1020.
This virtually "no-bleed", high-performance compound will not dry
out, harden, melt, or run, even after long-term continuous exposure
to temperatures up to 200°C. Even in a vacuum atmosphere (10-5
Torr, 24 hours@100°C), Sil-Free
TM
1020 exhibits virtually "no bleed"
or evaporation.
ORDERING INFORMATION
Sil-Free
TM
Part number Package Size
101700F00000G Syringe 43 grams (1.5 oz)
101800F00000G Tube 57 grams (2.0 oz)
101900F00000G Jar 57 grams (2.0 oz)
102000F00000G Tube 143 grams (5.0 oz)
102100F00000G Jar 457 grams (16.0 oz)
Color White
Thermal 0.79 W/(m-°C)
conductivity
Operating -40°C to +200°C
temperature range
Volume 10
12
Ohm-cm 2.3 ± 0.5
Weight 47.5 grams
Dielectric strength 225 volts/mil
Consistency Paste
Bleed 0.09 max
% after 24hr @ 200°C
Specific gravity 2.8 ± 0.2
Shelf life Indefinite
(unopened)*
Ther-O-Link
TM
is a silicone-based thermal compound that
cost effectively enhances the heat transfer between a semi-
conductor case and a heat sink. Easy to apply,Ther-O-Link
TM
substantially reduces dry interface thermal resistance, while
providing long life under a variety of conditions.
ORDERING INFORMATION
Ther-O-Link
TM
Part number Package Size
100000F00000G Ampule 1 gram (0.03 oz)
100100F00000G Syringe 35.7 grams (1.25 oz)
100200F00000G Tube 57 grams (2.0 oz)
100500F00000G Tube 143 grams (5.0 oz)
100800F00000G Tube 228.6 grams (8.0 oz)
101600F00000G Can 0.45 kg (1 lb)
108000F00000G Can 2.27 kg (5 lb)
132000F00000G Can 9.07 kg (20 lb)
Color White
Thermal conductivity 0.73 W/(m-°C)
Operating -40°C to +200°C
temperature range
Volume resistivity 1.0 x 10
15
Ohm-cm
Dielectric strength 250 volts/mil
Consistency Paste
Bleed 0.6 max
Specific gravity 2.8
Shelf life Indefinite (unopened)*
Aavid's Ultrastick
TM
is a unique phase-change thermal inter-
face material that surpasses grease in thermal performance
and long-term stability.This solid, silicone-free, paraffin-
based thermal compound changes phase at 60°C, with a
concurrent volumetric expansion that fills gaps between the
mating surfaces. Ultrastick
TM
comes in a convenient applica-
tor bar, allowing for neat, fast application to both heat sink
and component surfaces. One cost-effective application
leaves a thin, film-like deposit, providing excellent heat
transfer and low interface thermal resistance.
Ultrastick
TM
Temperature range -40°C to +200°C
Volume resistivity 1.0 X 1.0
15
Ohm-cm
Dielectric strength 250 volts/mil
Consistency Paste
Bleed 0.6 max
Specific gravity 0.28
Color Opaque White
Thermal resistance 0.03°C/W per square inch @ 20 psi
0.02°C/W per square inch @ 100 psi
Shelf life Indefinite*
Grease & Epoxy
ORDERING INFORMATION
Part number Package Size
100300F00000G Bar 47.5 grams (0.16 oz)
PRODUCT INFORMATION
PRODUCT INFORMATION
PRODUCT INFORMATION
* Recommended max. storage temperature: 40ºC (105ºF)
* It is recommended that the containers be turned over
every 6 months to minimize settling for ease of mixing
* It is recommended that the containers be turned over
every 6 months to minimize settling for ease of mixing