080p HDMI 1.3b Switcher 4:1 Installation Guide WWW.AAVARA.COM AAVARA INNOVATION CORP. ALL RIGHTS RESERVED Rev 1.
TABLE OF CONTENTS Chapter 1 .....................................................3 Introduction .................................................3 1.1 Features .................................................3 1.2 Technical Specifications..........................4 Chapter 2 .....................................................5 Installation ...................................................5 Chapter 3 .....................................................6 Troubleshooting.................................
Chapter 1 Introduction Aavara® SW421 allows one of 4 HDMI input (4 inputs like PS3, Xbox, STB, Blu-ray DVD…etc) to 1 HDTV digital screens. It facilities home theater ambiances by switching 4 of your desired HDMI digital contents to 1 HDMI digital screen. CEC* (Consumer Electronic Control) Pass-through allows one TV remote to synchronize your TV and all HDMI AV devices connected (all connected devices required CEC function).
1.2 Technical Specifications Model No. SW421 HDMI Single Link, TMDS. HDMI Source Input Port 4 Display Device Output HDMI Single Link, TMDS. Port 1 DC Power Jack x 1 HDMI Input Connector x 4 (F) HDMI Output Connector x 1 (E) Remote Control x 1 Interface Led Display HDMI input index x 4 (B) Operation temperature +5ºC to +35ºC Storage temperature -20ºC to +60ºC Humidity Range 5% to90% RH Signal Rate 6.
Single Link Range 480i, 480p, 576i, 576p, 720p,1080i,1080p HDCP Function HDCP Rev1.2 Compliant Cable Length 5M (In and Out respectively) Power Adapter 9VDC Enclosure Metal Dimension (mm) 245(W) x 107(D) x 27(H) mm Net Weight (g) 690g /1.52lbs Chapter 2 Installation 1. Connect the HDMI cable from the 4 of your HDMI devices into the 1080p HDMI 1.3b Switcher 4 Inputs. 2. Connect the HDMI cable from the 1080p HDMI Switcher Output CH1 to your Display (LCD/Plasma TV or projector). 3.
Chapter 3 Troubleshooting Problem HDMI Switcher does not work Solution 1. Make sure the 9V power is plugged in the HDMI Switcher. 2. Check to see if the LED light is on. 1. Make sure your video display is HDCP compliant. No Signal or poor picture 2. Plug your HDMI cable to source and display directly, if there is no signal or poor picture, please change another cable. 3. Make sure all HDMI connectors are tightly secured to all HDMI ports. 4. Turn off all equipments and restart all equipments.
Features Index: • CEC 7
ALL RIGHTS RESERVED. 2008 AAVARA INNOVATION CORP.
