User's Guide
6.2 Setting the ASA
As an instant reminder, test position. with magazine
off
the
camera, will al
so
display
th
e
CUTTent
setting
of
th
e
ASA
knob.
Make sure that the
ISO rating
of
the loaded film matches what is
selo
n the
ASA
knob. The
ASA
knob is located
10
th
e righl
of
the motor on the motor side.
6.3 Checklng for Runnlng Tlme
The yellow
LED located to
th
e right
of
the
mOlOr
, will flash once
per second on the second when
limecode is running
in
the
camera. Get into the hab
it
of
looking
for
this flash as an
addition
al
peace
of
mind check. If more than one camera is
counting time on the set, check that ail flashes
accur simultaneยท
ously.
Recommended
Film
Audio
Selections
7
The
/ollowing are recommendations
for
the audio timecodc
re
solving rates to use with specifie film speeds under normaf
operation. For less common situations,
(s
uch asjifming with
sync sound and a separate audio playback, jilming live monitors,
or reso[ving with audio/rom video recorders
).
consult your
Aaron representative
or
yOllr
transfer facility
for
advice.
Audio Selection
Smptc
30 non-drop
Smpte 25
Smpte 30 non drop
AatonCode
87