User's Guide
:sa
The
camere
Body
14.3 Positioning the Beamsplitter
The heamsplitter adjustment screw is localed undemeath a sma
ll
,
capped
port on the battery side
of
the
ca
mera.
Ta
access the
heamspliuer, unscrew and remove
thi
s sil ver cap. A
1.
3mm allen
head adjustment screw
will
be visible
waugh
(he opening. With
an
rulen wrench. gently
TO
,ate the adjustment screw approximate-
ly
30 lu
ms
in
the desired direction to position
or
relracllhe
beamspliner.
After
30
or
50
tums,
th
e adjusting screw will reach ilS S
IOp
and
resÎstance
will
he fell. AI Ihis point. SI
Op
and rOlale (he adjusling
screw
on
e lum
in
the opposite direction 10 complete the adjusl-
ment. By backing the beamsptitler off
ilS
stop, fine centering
of
the
CCD
targel is Jllaintained and
(h
e heamspliuer ilSeif is
Jess
susceptive
la
residuru shocks caused by a drop or sudden jolI.
Positioning the Beamsp
li
tler for video use - the adjusting screw
should
he
rotated
co
unt
er·
c1
ockwise
10
move Ihe glass in place.
Retracting the Beamsplitter for non-video use - the adjusting
screw should be rotaled
c1
0c
kwise
ta
move the glass out
of
view-
ing area.