User's Guide
The XTRpius uses six main connectars for power and
a~·ce.uory
inpul. Foliowing is a delai/cd lisl
of
the location and
mainfunc
+
tians
of
each.
13.1
XlR4
-
Power
ln
The XLR4 connector, located on the bottom
of
the PBX pancl,
is
the
main
power
input.
It
i
l!
designed ta accep! a standard on-
board battery
or
an XLR4 powercable ta another power source
sueh as a battery
belt, block or AC power supply.
13.2
Amph9
-
Accessory
Input
The Amph9 connector, located at the top
orthe
PBX panel, i
l!
one
of
Iwo main accessory connections on the Xl'Rplus and
provides
+1-.
Hz. and camera on/oIT.
It
is designcd to accept a
crystal speed control as
ilS
main input but will power any
~1(.:ct:S
sory (such as power zoom) and provide remate on/off control
as
weil.
ln the instances where the video assis! VR42
or
VR46 is used,
the CCD control unil is plugged directly into Amph9 and a dupli-
cate Amph9 connector is provided on the
sicle
of
the control unit
near the
CCD
on/off switch.
13,3lemo14
- CCD
Assist
The
Lemol4
connector. located directly unclcrncuth the Amph9
conneetor
on
the PBX panel, mates
th
e
CCD
heacl
assembly to
the
CCD
control
urUt.
When the CCD control unit is fastened to
the
body.
it
connecl~
tn the Lemol 4
and
the Amph9 (described
above).
Keep in mind that this connector can only
he
usecl
for CCD
assist;
if
the CCD head
is
not installed in a particular XTRplus
body, the
Lemol4
will
nOl
he
present and a black plug
or
blank
plate will seal
the eonnector pon.
13.4
Lemo6
-
Accessory
Input
The Lem06 connector. locuted on the buttery
sicle
at the rear
of
the base, is the second
of
twu mllin Ilccessory connections on the
The
Camera
Body
35