User's Guide

Installing the Battery on the Camera 3 1
Battery Charging 3 1
Other Power Options 3 2
2.8 Motor 3 2
Camera Speeds 3 2
Using External Speed Devices 3 3
Electronic Inching 3 3
2.9 Lightmeter 3 4
Display 3 4
Operation 3 4
Using the Lightmeter without Running Film 3 5
Testing and Adjusting the Meter 3 5
Turning the Lightmeter Off 3 6
2.10 LCD Control Panel and Jog 3 6
The Aaton Jog 3 6
Understanding the Control Panel 3 6
Aatonite 3 7
AatonCode 3 7
ASA Setting 3 8
Battery Voltage 3 8
Camera Preset Speed 3 8
Camera Specific Speed 3 8
Speed Phasing 3 9
Feet or Meters 3 9
Footage Remaining 3 9
Footage Elapsed 3 9
Mag ID 4 0
New Magazine’s Footage 4 0
Camera Software Version Number 4 0
2.11 LED Indicators 4 0
Position and Meaning of the Diodes 4 1
Camera Test Indicator 4 1
Camera Run Indicator 4 1
Low Battery Indicator 4 1
End-of-Film Warning Sequence 4 1
8-hours Warning Sequence 4 2
2.12 VHR Assists 4 2
Installing the Control Unit 4 3
The Internal Beamsplitter 4 3
Positioning the Beamsplitter 4 3
The Beamsplitter Axis Adjustment 4 4
4