User's Guide

2.2.8 Changing the Viewing Screen
The viewing screen is designed to be easily removed by the user
for the purposes of interchanging or for cleaning. To remove the
screen, unscrew the black tool marked Vw located in the hollow at
the rear of the camera’s carrying handle. Remove the port cap. Clear
the mirror shutter so that it is rotated safely inside the body by ro-
tating at the base of the shutter with your finger or by setting the
camera to test position, then removing the battery. Look into the
port and locate the threaded hole directly above the aperture open-
ing and screw in the tool until it is snug. Carefully pull the screen
straight out.
To reinstall the screen, screw the Vw tool into the threaded hole
of the screen until it is snug. Look into the port and locate the left
and right lip of the viewing screen holder. With its flat side facing
down, gently push the screen straight into the holder above the lip
until it seats firmly in place. Unscrew the Vw tool and store back in
the hollow of the carrying handle. Reaffirm that the screen is seated
properly by carefully pressing against the threaded hole with your
thumb.
23
THE CAMERA BODY