Aastra Phone 312 User Guide
Welcome to Aastra Thank you for choosing an Aastra product. Our product stands for the highest quality demands, teamed with first-class design. This instruction manual will guide you in the use of your Aastra Phone 312, and in doing so will answer all of your important questions. If you should require any additional technical support, or if you would like information about other Aastra products please contact the person responsible for your system or your retailer first. You can also use our website www.
Contents Using the phone........................................................................................................................
Contents C button ……………………………………………………………………………18 Signal button (R)………………………………………………………………………19 # button………………………………………………………………………………19 * button………………………………………………………………………………19 Number buttons ………………………………………………………………………19 Softkey: Menu ………………………………………………………………………19 Automatic fade out………………………………………………………………………20 Navigating the menu ..............................................................................................................
Contents Phone settings ........................................................................................................................39 Menu: Audio ……………………………………………………………………………39 Menu: Display …………………………………………………………………………41 Menu: Phone options ……………………………………………………………………42 Menu: Call diversion ……………………………………………………………………45 Menu: Alarm ……………………………………………………………………………46 WLAN: Registering a handset ..................................................................................................
Contents Servicing and maintenance ………………………………………………………………68 Environmental characteristics and disposal ………………………………………………68 Advice for disposal ……………………………………………………………………68 Declaration of conformity ………………………………………………………………69 Technical data …………………………………………………………………………70 Menu tree ………………………………………………………………………………71 Index……………………………………………………………………………………72 iv
Using the phone Safety instructions Correct use/declaration of conformity The Aastra Phone 312 is a handset for calling via SIP in a WLAN. The CE mark on the product confirms its conformity to the technical guidelines for user safety and electromagnetic compatibility, valid at the time of issuing the corresponding declaration of conformity according to European directive 99/5/EC. The declaration of conformity can be viewed online at http://www.aastra.com.
Using the phone The following advice must be observed without fail when installing, connecting and operating the phone: • Position the connecting cable where it will not cause accidents. • Only connect the connecting cable to the intended sockets. • Only connect authorized accessories. • Only use the mains adapter plug supplied (ID no.: 4515303). • Research has shown that in certain cases portable phones, which are switched on, can influence medical devices.
Using the phone Overview and basic information General With the Aastra Phone 312 calls are made over the Internet (VoIP - Voice over Internet Protocol). Access is gained via access points (APs) of a WLAN (Wireless Local Area Network). The handset itself uses the SIP standard (Session Initiation Protocol), so that the connections must be made via an SIP server or an SIP compatible phone system, which also supports this protocol.
Using the phone frequently as well as an activated vibration alarm are also decisive characteristics shortening the standby and talk times. Another factor reducing the talk time is a low RTP package length that is received by the other party. Reach WLAN handsets have a lower reach than firmly installed WLAN connections in a PC that are exclusively designed for data traffic. This is due to the fact that in the data traffic, more package losses can be tolerated than in voice operation.
Diagram Handset: Earpiece Display Reverse: Loudspeaker Arrow keys Softkey Speakerphone/ hands-free Softkey Info button Handset button Number pad Delete key/ ON/OFF button Connection for headset Signal button (R button) USB-Schnittstelle (für Service und spätere A Microphone 5
Diagram Buttons on the handset DE Softkeys – the function of an individual button is depicted in the display depending on status. If there are only two possibilities, they are divided between the left and right softkeys. If there are more possibilities, the softkey Options will then appear. F From the idle state, this button opens the telephone book. Within a menu or a list, you can scroll up or down using the arrow keys. r H Signal button/R button: Query button.
Installation Unpacking and installing the phone Unpacking The packaging contains: • Aastra Phone 312 handset • Charging point • Mains adapter plug (100 - 240V/50 – 60 Hz) with connecting cable (3 m) • One battery (stuck into the battery cover) • MEM card (installed or separate depending on the model) • Belt clip • Instruction manual (abridged version) Installing the charging point Your phone is produced for normal use conditions.
Installation Putting the charging point into operation In order to be able to put your phone into operation, you need to plug in the mains cable for the charging point. Safety instruction Only use the intended mains adapter plug with type designation ID no. Europe 4515303, U.S./Canada 4516883 for the charging point. Plug the mains cable plug into the socket on the charging station, and then plug the mains adapter plug into a mains socket.
Installation Putting handset into operation Precautions when handling the battery It is imperative that you read the safety precautions before you use the battery for the first time. Ensure that these safety precautions and all other operating instructions remain available for future reference. This device contains a Li-Ion battery pack. Not complying with any of the following regulations when using the battery will lead to the danger of overheating, fire and explosion.
Installation Precautions during use • The battery is only designed for use with this handset. • Only use the charging point supplied to charge the battery. • New batteries are not charged up. Therefore you must charge the battery before using it for the first time. • The use of the battery in a cold environment can shorten the expected battery life of a fully loaded battery. Charge the battery in a place where the temperature is in the region of 10°C to 35°C.
Installation Charging and use times Charging time: (empty battery) 4 - 6 hours to full capacity. Talk time: Up to 5 hours (when fully charged). Standby time: Up to 50 hours (when fully charged). Inserting the battery The battery is firmly attached to the battery compartment cover of the handset. To start operation, insert the battery as shown in the following sketch.
Installation Inserting the MEM card If the MEM card is supplied separately, you will need to insert this into the battery compartment. Safety instruction The MEM card must be handled with great care. The contacts must be free from dust, moisture, grease etc. Do not store the MEM card in warm areas (e.g. with direct exposure to sunlight). Do not bend the MEM card, this could destroy the contacts. • First press the MEM card out of the larger frame using your finger.
Installation Battery: Battery status The battery status is shown on the display. They mean: Battery status 81 - 100 % Battery status 61 - 80 % Battery status 41 - 60 % Battery status 21 - 40 % Battery status below 20% (Frame flashes) Battery almost empty, warning signal is sounded. • When the handset is in the charging point, the flashing and/or illuminated segments show the charging process and/or the battery status (as long as the display illumination is switched on).
Installation Logging on the handset Some preparations and programming are necessary to be able to integrate your handset into an existing wireless network (WLAN) and to register it on an access point (AP). You will find a detailed description of the corresponding steps in the chapter “WLAN: Registering a handset” starting on page 47. You can save five so-called “profiles” on your handset. These profiles contain the accounts of five different WLAN configurations.
Display screen, softkeys and buttons The display Symbols in the upper display row: Quality of the radio connection (four columns – secure radio connection; only one column – insecure radio connection). Microphone switched off. Battery status (see page 13). You have programmed and activated a local alarm time (see page 46). The “Do not disturb” function is activated (see page 42) Call diversion activated. The ring tone is switched off. The PIN protection for administrator entries is deactivated.
Display screen, softkeys and buttons Text Information on the current connection status or menu lists and texts will be displayed for you in windows. In the idle state you will see the network name with internal call number, your programmed user name, the current time and also e.g. a programmed alarm and activated features. The time will first be shown when it is transferred from the server. Selection lists (e.g.
Display screen, softkeys and buttons Softkeys and buttons Both of the buttons underneath the display and the arrow keys are known as softkeys. The functions assigned to the buttons are shown in the bottom display row. The button function changes automatically according to the particular operational status of the handset.
Display screen, softkeys and buttons Handset button According to the current status of the phone (e.g. idle state, in conversation or in editor mode) the handset button has the following functions: ... In idle state: The dialing tone is established. ... When there is an incoming call: The call is accepted. ... During a conversation: The conversation is ended and/or the connection is broken down. ... If you are browsing a list, e.g.
Display screen, softkeys and buttons ... When entering text or call numbers: Quickly pressing the button: Deletes the character to the left of the cursor. Pressing and holding the button: Deletes the entire entry. ... During the display of lists (e.g. call list): Quickly pressing the button: Deletes the entry. Signal button (R) Quickly pressing the button during a connection: A query is initiated. # button Pressing and holding the button in idle state: Switches the key lock on.
Display screen, softkeys and buttons Automatic fade out Menus/settings are automatically switched off in the following conditions: • No entries for 1 minute with open menus. • No entries for 3 minutes with open “entry windows” (e.g. profile settings) – without storing the entries that have already been made. • If a call is received when in the idle or connection state.
Navigating the menu Example: The main menu If you press the Menu softkey, the main menu will be displayed. Menu Audio Display Phone options Call diversion Alarm System Back OK The following menu items are available for selection: - Audio - Display - Phone options - Rufumleitung - Alarm - System Highlight an entry using the arrow keys. Press OK to call up a submenu. Please see the chapter “Phone settings” for a more detailed description.
Navigating the menu Menü Anzeige Font Audio Kontrast Small font Anzeige Beleuchtung Large font ✔ Telefonoptionen Hintergrundbild Wecker Language System Font Back Then select e.g. font with the arrow keys and press OK . After doing this, your new setting will be adopted. OK Switching function Some functions only offer two settings – ON or OFF. An active function (ON) can be identified by the ✓ such as e.g. Do not disturb ✓ . If the function is switched off, the symbol — appears e.g. Do not disturb – .
Navigating the menu Example: Telephone book/editor The example explains the possibilities for creating a new entry in the telephone book, further options for the telephone book can be found starting on page 37. Open the telephone book using the arrow keys . Telephone book Search: | Press Options and confirm New using OK . You will then reach the entry location. Back Options New entry Name | Call number Back Options Enter the name.
Navigating the menu The editor Enter names/call numbers Using the editor you have the opportunity to make new entries in lists of call numbers and names (e.g. telephone book), or to make changes. The maximum length is 32 characters for number entries (call numbers) and 16 characters for word entries (names). The following example shows the character set of the buttons when the display language is set to “German”.
Basic functions Switching the handset on/off Once the battery has been charged for the first time, your handset will be switched on automatically and is ready for use. You can switch off your handset to maintain the battery life for longer. Switching off the handset C Press and hold the C button. Note If your handset is switched off, it cannot respond to an incoming call or activate a programmed alarm. Incoming calls will not be entered into the call list.
Basic functions Key lock Switch the key lock on before carrying the handset in your pocket. This will prevent a call number being dialed accidentally. If you receive a call, the key lock will be switched off for the duration of the call. You can accept the call using the handset button. Turning the key lock on #Press and hold the pound button in the idle state. The symbol will appear over the left softkey. Turning the key lock off DPress the softkey .
Basic functions Setting the handset volume during a conversation You are having a conversation (using the handset, loudspeaker or headset). Volume settings can be carried out using the arrow keys or number keys 1-7. The current setting is displayed graphically. The altered setting is only temporarily valid for the existing connection. If the temporary setting is confirmed using OK , it is valid as the new basic setting (see page 39) for further connections.
Basic functions Change the display contrast In order to adjust the display to on-site illumination/brightness, you can change the contrast. The setting can be made in the menu “Display > Contrast”. Handset secrecy button If you do not want the person you are on the phone with to hear what you are saying e.g. to another person in the room, you can momentarily activate the secrecy button. You are in the middle of a conversation D Press Mute . The symbol appears in the display.
Calling Dialing the call number All calls described in this section that are initiated by pressing the handset button . carried out in the hands-free mode using the loudspeaker button H Acan also be Dialing call number with predial When using predial, you have the opportunity to correct your entries before dialing. t Enter the call number in the idle state. Correct mistakes using the arrow keys (cursor) and the C button to delete and replace with new entries if necessary.
Calling Calling from the redialing list The 10 most recently dialed call numbers (max. 32 characters) are saved in the redialing list. Each new number that is dialed overwrites the oldest entry in the list. You can see the call numbers in the redialing list and call up the corresponding details (e.g. call time). D In the idle state, press . F Select the desired call number. A Press the handset button to dial immediately. … or E Press E Press Options . Dial / OK to dial the call number.
Calling Calling from the telephone book The telephone book can save a maximum of 100 entries, which are automatically placed in alphabetical order. F In the idle state, press the arrow key F Select the desired name . or t Enter one or several of the letters which start the name in order to start a targeted search (if necessary press the number buttons several times in quick succession). A Press the handset button to dial immediately.
Calling Calling from the caller list B When you press the info button a list of calls that have not been accepted will be displayed. You can see the call numbers in the caller list and call up the corresponding details (e.g. call time). B Press the info button in the idle state. F Select the desired call number. A Press the handset button to dial immediately. … or E Press E Press Options . Dial / OK to dial the call number.
Calling Accepting calls Calls are signaled acoustically and optically (flashing i key) by the handset and shown on the illuminated display. The call number or the caller’s name will be shown. If the call number is saved in the telephone book, the caller’s name will be displayed as entered in the telephone book. >Call number< Reject During the call you can… D … Reject the call using the Reject softkey (if so, caller hears busy tone). A Press the handset button to accept the call.
Calling Putting a conversation on hold You are in the middle of a conversation. r Press the signal button. The conversation is put on hold. or E Press E Press Options . OK . The conversation is put on hold. Getting back to a held conversation r Press the signal button. You will be reconnected with the person on the other end of the phone. or E Press E Press Options . OK . You will be reconnected with the person on the other end of the phone.
Calling Calling another contact during a conversation Making a query call You are in the middle of a conversation. r Press the signal button – the first conversation is put on hold. t Enter the call number with the number buttons and finish it with # (or wait 4 sec). or Select a call number from the caller list, redialing list or telephone book as described starting on page 30. To end the query, and to return to the held connection: E Press Options . . F Select Disconnect E Press OK .
Calling During the query: Toggle If the connection is achieved, you can use the signal button in the conversations as you choose (toggle). r to talk to either of the other people r The conversation that is currently on hold will be activated, and the other conversation put on hold. Transferring a call You are conducting a query conversation and are currently “toggling” between calls (see above): A Press the handset button – the conversation will be transferred.
The telephone book New entry The telephone book can save 100 entries: Call numbers of up to 32 numbers, names of up to 16 characters. . F In the idle state, press the arrow key E Press Options . and confirm with OK . F Select New t Enter the name and use the arrow key to proceed to enter the call number (possibility for correction see page 23). t Enter the call number and press OK . The entry will be saved.
The telephone book Editing an entry F In the idle state press the arrow key and scroll to the entry F or Enter the start of the name in order to start a targeted search t(if necessary press the number buttons several times in quick succession). E Press Options . F Select one of the following menu items and confirm with OK . Edit You can make changes to the names and the call numbers. Delete Deletes the entry concerned immediately.
Phone settings Menu: Audio E Press Menu . and confirm with OK . F Select Audio F Select one of the following menu items and confirm with OK . Select one of the following menu items and confirm with OK . Ringer settings Melody Select a melody using the arrow keys and confirm it using OK .. Ringer volume Select the desired ringer volume with the arrow keys and confirm with OK . Ringer device Select the appropriate entry with the arrow keys and switch on ✓ or off – using OK .
Phone settings Select one of the following menu items and confirm with OK . Volume … Earpiece Select the desired volume with the arrow keys and confirm with OK . … Loudspeaker Select the desired volume with the arrow keys and confirm with OK . Note If the handset is in energy saving mode (the display is off), the first time a button is pressed it will not be acknowledged by a “key click”.
Phone settings Menu: Display E Press Menu . and confirm using OK . F Select Display F Select one of the following menu items and confirm with OK . Contrast Select the desired contrast with the arrow keys and confirm with OK . Illumination You can set the time for which the illumination should stay on. Please consider that long illumination times result in increased energy consumption, which will be at the cost of the standby time of the handset.
Phone settings Menu: Phone options E Press Menu . and confirm using F Select Phone options F Select one of the following menu items. Do not disturb – You can switch this function on ✓ or off – using OK . If it is switched on, the symbol appears in the display. Incoming calls are not signaled and the caller will hear the busy tone. However, the calls are listed in the caller list. Call wait. off – Using OK , this feature can be switched on ✓ or off – .
Phone settings - Suomi - Norsk - Polski Select the desired language with the arrow keys and confirm with OK . … Country Press OK , select one of the entries offered and confirm with OK . Selecting a country means that the tones such as e.g. the dialing tone or the busy tone will be played back in the way appropriate for the specific country.
Phone settings … 44 Time format Press OK and select the date and time format used in your country using the key. The following settings are possible: - day, month, year (dd.mm.yy) - month/day/year (mm/dd/yy) - year - month - day (yy-mm-dd) - 24 hour time format - 12 hour time format, am/pm.
Phone settings Menu: Call diversion* You can divert your calls to another telephone number (call rerouting). Rerouting can be effected immediately, if your telephone is busy or after a certain time (max. 15 seconds). E Press Menu . and confirm using OK . F Select Call diversion F Select one of the following menu items and confirm using OK . Unconditional – Using OK the respective property can be switched on ✓ or off – . Busy – Using OK the respective property can be switched on ✓ or off – .
Phone settings Menu: Alarm You can program an alarm time, at which the handset will give off a one-off wake-up call. The wake-up call lasts for 60 seconds and can be stopped by pressing OK . If the wake-up call is switched on, the symbol appears in the display. E Press Menu . and confirm using OK . F Select Alarm F Select one of the following menu items and confirm with Activ e Set – OK . Switch the alarm function on ✓ or off – using OK . Use Back to transfer the settings.
WLAN: Registering a handset Setting up a WLAN profile You can store the data needed for up to five different WLAN networks in your handset. Each set of data is saved in a profile. When changing to another network you only need to activate the corresponding network to be able to connect. There are two ways to set up a profile: You can either carry out the selection using “Site survey”, or you can enter the configuration manually.
WLAN: Registering a handset Manual configuration E Press F Select F Select F Select Menu . System and confirm using OK . Network and confirm using OK . Profiles and confirm using OK . If there is still no profile saved: Press New . If profiles are already saved: Press Options , select New PIN (“22222” by default). and confirm with OK . Enter the administrator The empty entry masks for a network profile will be opened.
WLAN: Registering a handset you must enter it again. In the AP, always set the first WEP key as default value and also use it in the device settings. Power save mode : Using this setting, you can influence which WLAN power saving mode will be used during the voice connections. In most cases the Auto selection should find the suitable setting. Not every AP supports all power saving modes.
WLAN: Registering a handset NTP server: The NTP server can even be set manually when the IP address allocation “per DHCP” is selected. The NTP server address set manually takes precedence over an NTP server address received from the DHCP server. DSCP/ToS: Here, the value of the Type of Service Byte (RFC 791) can be determined in the IP header. The value is entered in decimal format. This value is set in all outgoing SIP and voice packages.
WLAN: Registering a handset Changing the profiles E Press Menu . and confirm using OK . F Select System F Select one of the following menu items and confirm with OK . Select one of the following menu items and confirm with OK . Network Select one of the displayed profiles and press Options . Profiles … Select The profile that is currently active is marked with a ✓ . Select one of the profiles from the list and confirm using OK .
Setting up a SIP server You can store the accounts of up to five different WLAN networks in your handset. The data required for this is all stored as accounts in a list from which a server can be selected. The data for the SIP account is defined by the system administrator. E Press Menu . F Select System F Select Accounts F and confirm using OK . and confirm using OK . or F per DHCP Press Options , select New and confirm with OK . Enter the administrator PIN (“22222” by default).
Setting up a SIP server Example: sip.aastra.com sip.aastra.com:8200 172.30.203.12:8200 When making the entry, use the asterisk button to switch between different styles of writing: Letters, numbers or IP addresses. In the “IP address” mode you can enter a dot using the pound button. Registrar: If the registrar is not the same as the SIP proxy, its address can be entered here. If this field is empty, the SIP proxy will also be used as the registrar.
Setting up a SIP server In-band: Like the sound, the DTMF tunes are also transmitted as RTP packages. Recognition is usually only possible with Codec G711. This setting should only be selected if the other party does not support any other mechanism. In-band + INFO: Both transmission types are activated. Please note: Possibly, the other party recognises numbers twice. Changing accounts E Press Menu . and confirm using OK . F Select System F Select one of the following menu items and confirm with OK .
Tools for troubleshooting/info Ping A ping (small data packet) is used to measure the reliability of a network connection and the reaction time of a server. In using this, an ICMP echo request is sent from the handset to a remote host. As soon as the host answers, the handset calculates the time elapsed in milliseconds. It will also be determined if data packages have been lost. Whilst ping is running, the energy saving mode in the handset will be deactivated.
Tools for troubleshooting/info Traceroute The traceroute sends ICMP echo requests with increasing TTL (time to live) to one processor. This can be used to determine the presence of routers which are traversed on the way to the target address. The round-trip time between sending a request and the receipt of a response at each of these routers is also measured. Three requests are sent to each node (hop) in the network. Example display: traceroute to 172.17.1.1 ... 1: 172.30.0.2 150 43 50 ms 2: 172.30.206.
Tools for troubleshooting/info Site survey The access points (APs) and their field strengths, which can currently be received, are displayed in a window (upper area). These may be APs which the handset can connect to, but may also be ones which belong to foreign systems. If a network profile has been established, APs with a matching SSID appear in black, whilst foreign APs are displayed in red. If a connection to an AP exists, this will also be marked with an asterisk “*”.
Tools for troubleshooting/info Roaming info If this option is active, the handset will bring up an alert window each time a connection to an AP is established, lost or changed. The message contains the BSSID of the AP. It will disappear automatically after a few seconds. The message appears when the option is active irrespective of the operational status of the device, e.g. even during a conversation. This function can be used to detect errors and weaknesses in an existing installation.
Tools for troubleshooting/info On the line in the diagram, AP connection loss (disassociation) is represented by red symbols. Green symbols designate a connection (association) to the AP, or a change of APs. E Press F Select F Select F Select Menu . System and confirm using OK . Network and confirm using OK . Info and confirm using OK . Info (on the SIP server) The status of registration to the SIP server is displayed.
Tools for troubleshooting/info Syslog This gives you a representation of the internal messages and error entries of the system. These can also help service technicians when trying to locate errors. E Press F Select F Select F Select Menu . System and confirm using OK . Network and confirm using OK . Syslog and confirm using OK . Move the window with the right softkey 60 to display the complete text.
Software update/licenses/PIN Version Under Version you can see the version numbers of the software (SW) and the hardware (HW) of the device. E Press F Select F Select F Select Menu . System and confirm using OK . Software and confirm using OK . Version and confirm using OK . Update Using this function, the handset software can update itself. In order to do this, the handset must be connected to a WLAN from which the server is attainable.
Software update/licenses Server: IP address or name of the server from which the software should be loaded. Preset on delivery: solutions.aastra-detewe.de Filename: Pathway and name of the file. Preset on delivery: outgoing/aafon312.dnld Note The updated is cancelled if the software to be loaded complies with the already existing one. Licenses Here you will find the open source software licenses (see also page 64). E Press F Select F Select F Select Menu . System and confirm using OK .
Reset Deleting the MEM card You may delete any data on the MEM card and restore the default settings. When doing so, you also delete the profiles and the access data. The local telephone book can be deleted separately. • Switch off the handset (keep the C key pressed). • Simultaneously press the C key and number 5 and keep them pressed. • Only release the keys if you see a confirmation in the display. Note After the deletion, “English” is switched on as display language.
Appendix Free software The product contains, among other things, embedded Open Source Software, developed by Third Parties. The license terms and conditions associated with this software require that Aastra-DeTeWe give copyright and license information to you. A list of the Open Source Software contained in the product and the Open Source Software Licenses are available below.
Appendix Supported DHCP options DHCP options supported by the Aastra Phone 312 Designation Name Length Meaning 1 Subnet mask 4 Subnet mask value 2 Time offset 4 Time offset in seconds from UTC 3 Router N N/4 Router addresses 6 Domain server N 15 Domain name N 42 NTP servers N 43 Vendor specific N Reference [RFC2132] Comment Optional [RFC2132] [RFC2132] Optional Optional, only first entry used N/4 DNS server addresses [RFC2132] The DNS domain name of the client [RFC2132] NTP Server addresses [R
Appendix Designation Name Length Type 26 SIP Auth. Name N text Supported country codes Value 1 2 3 4 5 6 7 8 9 10 14 16 25 100 102 66 Country GERMANY GREAT BRITAIN SWITZERLAND SPAIN FRANCE ITALY RUSSIA BELGIUM THE NETHERLANDS CZECH REPUBLIC FINLAND POLAND TAIWAN USA CANADA Meaning SIP Authentication Name Comment Necessary if the access data has been configured using DHCP and this value does not correspond to the user ID.
Appendix Questions and answers Net traffic in idle state Why are the values from my PC provided by “Ping” so poor? If the device is in idle state, the network capacity is reduced as far as possible. If in this state, “Ping” packages (ICMP Echo Requests) are sent to the Aastra Phone 312 from the outside, the answers often take more than one hundred milliseconds. The device will automatically adjust the network activity depending on the state.
Appendix Servicing and maintenance Your phone is a product that meets the highest requirements for both design and construction. It should therefore be handled with care. The following suggestions are intended to help you to enjoy using this product for a long time. Observe all safety instructions on page 1. These instructions are equally valid for the handset, the charging point and all accessories. To clean the phone, first remove the mains plug from the charging point.
Appendix The product that you have purchased has been developed according to state of the art technology with regard to the environment and recycling, and therefore complies with the requirements of the European directives. The product is labeled with the symbol displayed here. This symbol means that when the owner of the product wants to dispose of it, they are obliged to do so in a waste collection that is separate from the unsorted municipal waste collection.
Appendix Technical data Standard: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802.11b/g Number of channels: . . . . . . . . . . . . . . . . . . 14, possibly restricted by the regulatory domain Frequencies: . . . . . . . . . . . . . . . . . . . . . . . . . . 2.412 GHz – 2.484 GHz, possibly restricted by the regulatory domain Transmitting power: . . . . . . . . . . . . . . . . . . . 100mW maximum Security: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix Menu tree Audio Ringer settings Signal tones Volume Display Contrast Illumination Background Font Phone options Do not disturb Call wait. off Auto answer Auto key lock Silent charg.
Appendix Index A Accepting calls ..................................................33 Acknowledgement tones................................39 Administrator PIN.............................................62 Alarm ..................................................................46 Alarm time .........................................................46 Audio ..................................................................39 Auto answer ......................................................42 Auto key lock.
Appendix I Illumination.................................................27, 41 INFO ....................................................................53 Info (on the network connection) .................58 Info (on the SIP server) ....................................59 Info button.........................................................32 Initial operation ................................................10 Inserting the battery ........................................11 Inserting the MEM card ...........
Appendix Safety instructions..............................................1 Scope of supply...................................................7 Security...............................................................48 Servicing.............................................................68 Setting the ringer during a call ......................27 Setting up a WLAN profile ..............................47 Signal tones.......................................................39 Silent charging..................
75
Aastra Phone 312 www.aastra.