User`s guide

Installation and First-Time Operation

eud-0840/2.0 — I7.6 — 08.2007

Connecting the Office 60IP

Connections

Connecting your phone to the LAN

This phone communicates via the same connection as your PC (IP network / LAN). This means

you do not need a special phone connection. Ask your system administrator if you have any

doubts about your phone’s connection.

• Connecting the LAN cord (not included in the scope of delivery) to a LAN socket.

• Plug the connector at the loose end on the underside of the phone into the LAN socket.

• Desktop installation only: To relieve the strain on the cable feed the cable through one of the

cable guides on the stand rest.

Connecting your PC to the LAN

If required, you can connect your PC or another LAN device to the phone, for example a printer.

• Connecting the LAN cord (not included in the scope of delivery) to the PC’s network socket.

• Plug the connector at the loose end on the underside of the phone into the PC socket.

• Desktop installation only: To relieve the strain on the cable feed the cable through one of the

cable guides on the stand rest.

Connecting to the IP network

Connecting the handset

Connecting the power supply

Note:

Your system administration will take care of the IP addressing and the commis-

sioning of the phone. The IP addresses and other information about your

phone is available in the setting mode.

eud-0840_en.book Page 66 Monday, August 13, 2007 2:59 PM