User`s guide

Personalizing Your Phone
55
eud-0840/2.0 — I7.6 — 08.2007
n
Storing a Function under a Key – Function Key
You want to retrieve a frequently used function - for example "call forwarding on no reply" -
using a single keystroke rather than having to enter it by hand. Usually the function is assigned
so that you:
• activate the function with the first keystroke,
• and deactivate the command again with a second keystroke.
n
Clearing a Key
You want to clear the assignment made to a configurable key.
The No function function is provided specifically for this purpose.
<long>
To store a function under a configurable key:
Press the key and hold it down for a moment.
Þ
Display shows choice of key types.
Function key
Scroll to Function key and press the Select Foxkey.
Þ
The currently set function is displayed with .
<Function>
Select the function you want and press the Select Foxkey.
Þ
The further prompting depends on the function (see Chapter "Supplemen-
tary features", page 18). Once you have made all the settings, the function
is stored under the key.
Note:
Besides the predefined functions you can also define your own function. For
more information please refer to the Chapter "Function Commands", page 56.
<long>
To clear a configurable key:
Press the configurable key and hold it down for a moment.
Þ
The display shows the key type.
No function
Scroll to No function and confirm Ok with the Foxkey.
Þ
The key configuration is cleared.
eud-0840_en.book Page 55 Monday, August 13, 2007 2:59 PM