User`s guide

Supplementary features

eud-0840/2.0 — I7.6 — 08.2007

Forwarding to a message

You cannot be reached on your phone. You want any internal subscriber who calls you to get a

message. The subscriber hears the busy tone and obtains a message on his display.

Requirement: The internal subscriber must have a phone capable of receiving messages. Sub-

scribers whose phone cannot receive messages are put through to your phone or rerouted to a

destination predefined within the system.

You can use one of the text messages stored in the system directly, modify it or create a new

message.

Locking Your Phone

You need to leave your desk and want to ensure that no-one can alter your phone's settings,

look at your private data, or make outside calls from your phone.

You can lock your phone with a PIN consisting of two to ten digits. You can modify this via menu

(see chapter "Changing the PIN", page 49) or with */# procedure *47 (see “User’s Guide */# Pro-

cedures as of I7.1”).

Press Foxmenu, then the Foxkey.

Forwarding

Scroll to Forwarding and press the Select Foxkey.

Call Forwarding Uncon-

ditional

Scroll to Call Forwarding and confirm Ok with the Foxkey.

Message

Scroll to Message and confirm Ok with the Foxkey.

Select one of the text messages stored in the system and press Select Foxkey.

<Text>

Adapt or expand the text and confirm Ok with the Foxkey.

Forwarding to message is activated.

Note:

If you activate another call forwarding unconditional, the message you have

left on your phone will be deactivated.

eud-0840_en.book Page 34 Monday, August 13, 2007 2:59 PM