User`s guide

Supplementary features

eud-0840/2.0 — I7.6 — 08.2007

Starting an Announcement

You want to address internal subscribers directly via their loudspeaker – where available – ,

without waiting for a reply (similar principle to that of an intercom system).

Requirement: It is essential that the internal subscriber has not barred his phone against

announcement (for configuration see the Chapter "Do not disturb/Call waiting/Intrusion/

Announcement/Forward", page 50).

Reject

Rejecting the call:

Foxmenu > Press Reject Foxkey or End key.

You remain connected with your first call partner. The call-waiting party

hears the busy tone.

Exit

Ending a current call:

Foxmenu > Press the End call Foxkey.

1. The first call is terminated. You are now connected with the party who ini-

tiated the call waiting.

Pick up the handset.

Announcement

Foxmenu > Press Announcement Foxkey.

Select destination (Subscriber or Group) and confirm Ok with the Foxkey.

Enter the phone number and confirm with the Ok Foxkey.

Subscriber is made aware of the announcement by an acoustic signal. The

display reads Announcement: You can now talk.

Note:

You can also search in the phone book, last-number redial list or call list for the

phone number of the person you are looking for.

Or:

• Press Foxmenu > Foxkey Menu.

• Scroll to Call features and press the Foxkey.

• Press Announcement, select destination, and confirm Ok with the Foxkey.

The display shows the number of the phone from which you last picked

up a call.

• Confirm Ok with the Foxkey or pick up the handset.

Subscriber is made aware of the announcement by an acoustic signal. The

display reads Announcement: You can now talk.

eud-0840_en.book Page 26 Monday, August 13, 2007 2:59 PM