User manual

52 Aastra MBU 400 Administrator Guide
Using Configuration Files
four-digit access code is formatted as two hexadecimal numbers, separated by a
comma. The first two digits correspond to the first number, and the last two digits to
the second number. Some examples of AC_CODE values follow.
Note: Changing the AC Code (access code on the Web UI) will not change the access
code on handsets. Handset access codes must be changed individually. Change the
access code on each handset using
Settings>System Settings>Access
Code
>Handset.
Protecting Handset Menus
The configuration parameter VOIP_SETTINGS_PIN_CODE sets the pincode for the
Aastra MBU 400 system, whether or not the pincode is in use. The default value is
"0000".
This setting is used to add pincode protection to the following handset menus:
•
VoIP settings
• Internet settings menu
• System settings menu
• Telephony Settings>VoIP line
• Telephony Settings>Call groups
Pin protection can be enabled and disabled individually using the configuration
parameter PINCODE_PROTECTED_SETTINGS, which is a bit mask field.
Access
Code
Hexadecimal
AC_CODE Value
0000 0,0
0001 0,1
0010 0,16
1111 17,17
1222 18,34
1314 19,20
3344 51,68
5555 85,85
6066 96,102
7077 112,119
8088 128,136
9999 153,153
Bit Setting
0 (LSB) VoipSettings
1 VoipLine
2 CallGroups
3 SystemSettings
4 InternetSettings
5 Reserved