User manual

Aastra MBU 400 Administrator Guide 45
Using Configuration Files
Configuration file example:
%SRV_0_SIP_UA_DATA_DOMAIN%:"proxy.goip.dk "
%SRV_0_SIP_URI_DOMAIN_CONFIG%:0
%SRV_0_SIP_UA_DATA_SERVER_PORT%:5060
%SRV_0_SIP_UA_DATA_SERVER_TYPE%:0
%SRV_0_SIP_UA_DATA_SERVER_IS_LOCAL%:1
%SRV_0_SIP_UA_DATA_REREG_TIME%:3600
%SRV_0_SIP_UA_DATA_PROXY_ADDR%:"proxy.goip.dk "
%SRV_0_SIP_UA_DATA_PROXY_PORT%:5060
%SRV_0_DTMF_SIGNALLING%:0
%SRV_0_SIP_UA_CODEC_PRIORITY%:1,0,2,4,255
%SUBSCR_0_SIP_UA_DATA_VOICE_MAILBOX_NAME%:""
%SUBSCR_0_SIP_UA_DATA_VOICE_MAILBOX_NUMBER%:""
STUN, RPORT, SIP port settings
STUN mode, RPORT, RTP port and SIP port can be configured from the Aastra Web
UI NAT/RTP Settings page, or from the handset menu using
Settings>Internet
settings
>NAT provisioning>Manual
Note: The popup shown when NAT provisioning fails will not be displayed when the
Internet settings menu is pincode protected.
.
SUBSCR_0_SIP_UA_DATA_VOICE_MAIL
BOX_NUMBER
String (max 22 characters) Voice Mailbox number
Sip address/ phone number used when
listening to messages
CODEC_SILENCE_SUPRESSION 0,1 [Disable,Enable] Landline silence supression for G729
CODECs.
(default=1)
Parameter (Continued) Values (Continued) Description (Continued)
Parameter Values Description
SIP_STUN_ENABLE 1 (default) Defines whether Network Address Translators
should be detected and bypassed by means of
STUN.
1 = enabled (default), 0 = disabled
SIP_RPORT_ENABLE 0 (default) Defines whether 'rport' should be used in sip
messages.
1 = enabled, 0 = disabled (default)
NETWORK_STUN_SERVER String (max 32 characters) Name of STUN Server
SIP_STUN_BINDTIME_GUARD 80 (default) If stun is enabled this value specifies in
seconds how often the system will guard the
NAT bindings. Guard for NAT bindings helps
the system to react properly if e.g. the NAT
device has been reset.
If this value is zero, no guarding will be made.