User manual

36 Aastra MBU 400 Administrator Guide
Using the Web UI
— If you have selected VoIP calls, choose the number of the registered SIP
account to use when dialing out.
• Fill the parameter Handset name with the name and number you want displayed
on the 420d screen. If nothing is entered, the default "Handset 1" for account 1,
"Handset 2" for account 2, and so on will be used.
• Enable the Match IPEI to Handset parameter to activate IPEI matching and fill
in the IPEI For Handset for each handset.
Note: The handset IPEI is the Handset ID number displayed on the handset status
page when you press the + (volume up) button, or viewed through the handset
menu using
Settings>System settings>Handset settings>Handset ID. See
Finding the MBU 400 IP Address on page 18 for details.
IPEI matching ensures that Handset 2 will always register as Handset 2, for
example, even if no Handset 1 is registered. If the IPEI is not matched, handsets
will register in first-come first-served order, and removing one handset may cause
others to re-register under different names.
4. In the Phonebook Selected section, choose between Private or Shared.
A shared phonebook results in the same Call Log and Contacts List appearing on
all handsets. A private phonebook results in individual Call Logs and Contacts
Lists for each handset.
5. Enable or Disable Join Calls as desired.
Using the Join Calls feature allows any handset to connect to a call in progress on
another handset registered to the same MBU 400.
6. Click to save your new configuration settings.
7. Click to reset the MBU and apply the new settings.
8. Click Home on the left menu to open the Welcome page showing system status
and account information.
9. Confirm that the displayed
Identity 1 Status is "OK". (For VoIP Account 2, check
Identity Status 2, and so on.)
10. Press the + (volume up) key on the side of a registered 420d handset. Scroll down
with the navigation key to the VoIP status. "
SIP1" (or SIP2, and so on) should
display "
Registered".
11. In the handset menu, select
Settings>Telephony Settings>VoIP Line to check the
allocated SIP account: SIP1, SIP2, … or SIP8.
Changing Time Settings
The time settings configuration options allow the Aastra MBU 400 system time to be
set by an external time server, with a set refresh rate and local timezone. Daylight
savings time options allow you to set automatic annual time changes, or turn daylight
savings time on and off manually.