User manual

28 Aastra MBU 400 Administrator Guide
Using the Web UI
The following firmware settings are available on the Management Settings page, and
can be changed by entering new values or selecting from the drop-down menus.
Field Description
Firmware update server address The IP address or domain name of the server containing
firmware update files.
Default value is Mbuupdates.Aastra.com.
Firmware path The firmware update server path in which to look for firmware
update files. Must start with a slash (/).
Default value is /mbu/
Scheduled Firmware Update Turns on and off the scheduled firmware update.
Default value is Disabled.
Polling method Selects between Absolute (checking for firmware at a set
time) and Relative (checking for firmware when a set time has
elapsed since the last boot).
Default value is Absolute.
Frequency for relative searching for new
software
Time in seconds after boot to complete a firmware check when
Relative polling is selected.
Default is 86400.
Hour for absolute searching for new software Hour to check for firmware updates (using a 24 hour clock)
when Absolute polling is selected.
Default value is 03.
Minute for absolute searching for new software Minute to check for firmware updates (using a 24 hour clock)
when Absolute polling is selected.
Default value is 00.
Required firmware version Minimum firmware version.
Default setting is the current firmware version.