Setup guide

Automatic Call Back
This feature allows the user to place a call to the last number they tried to reach whether the call
was answered, unanswered or busy by dialing an activation code.
User Action Required to Activate or Use the service:
Pick up the receiver
Listen for dial tone
Press *66
Expected Call and Network Behavior:
If the number called is idle the call will ring through and complete normally. If the called number is
busy the user will hear a special announcement and the feature will monitor the called number for
up to 30 minutes. When both lines are idle, the user hears a special ring.
During the monitoring process the user can continue to originate and receive calls without
affecting the Call Return on Busy request. Call Return on Busy requests can be canceled by
dialing the deactivation code.
User Action required deactivating or ending:
Lift the receiver
Listen for dial tone
Press *86
Calling Number Delivery Blocking (CID Block)
Allows the subscriber to temporarily change the permanent public/private status indicator of
his/her directory number (DN) and thus control its availability to the called party.
*67 – Activation
*68 – Deactivation
Selective Call Forwarding
Allows the subscriber to have incoming calls from a limited number of calling parties forwarded to
a pre-specified remote station.
*63 – Activation
*83 – Deactivation