Setup guide

to complete the transfer without waiting for the 3rd party to answer first.
When the user presses the switch hook or flash button, the transferee is placed on hold. When
the user successfully dials the transfer number and the party answers the transferee can be
added to the call by pressing the switch hook or flash button creating a three-way conference.
When the user hangs up the phone the transferee and the called party remain in a call.
Three-Way Calling
Start a conference call when using a simple phone without call control capability. Flash Three-
Way Calling allows you to perform a conference call even when your phone does not have a
conference button. To conference a call, flash the phone after you have made the first call (click
the flash button or click the hang up button once) then dial the second number of the person you
would like to complete the conference with. Once the second number answers, click flash again
and the conference call will be established. To end the conference, hang up. If you have Flash
Call Transfer, the conference does not end when you hang up since the callers are transferred
together.
User Action required activating or using:
Press the switch hook or flash button on the phone to place the first party on hold
Listen for three short tones followed by dial tone.
Dial the number of the 3rd party.
When the 3rd party answers you may have a conversation with them while the other party is on
hold.
To hold a conference with the party on hold and the 3rd party, simply press the switch hook or
flash button
Expected Call and Network Behavior: The VoIP Service supports up to two calls per line. The
VoIP Service can conference two calls by bridging the 2nd and 3rd parties.
User Action Required to Deactivate or End: Hang-up the telephone.
Line Blocking Deactivation
Line Blocking Deactivation allows a caller to dial a delivery feature access code before dialing a
complete telephone number to temporarily override the presentation status of both the caller's
directory number and the calling name. If the caller enters the delivery code, then the calling
identity presentation status will be shown as "public" for both caller directory number and calling
name.
*81 – Activation
*82 – Deactivation