Setup guide

Below are steps for accessing the web interface of your IAD (Sipura SPA and Linksys PAP2).
Find out the existing IP address of the phone adapter (Sipura IAD or Linksys PAP).
Pick up the hand-set
Press the star (*) key four times. You should hear a voice say, "Configuration menu."
Dial: 110#
Write down the IP address (will be something like: 192.168.0.101)
From the web-browser of your computer (ie: Microsoft Internet Explorer) go to the IP address
obtained in step 1d) above. (Ie: http://192.168.0.101).
Click on the "Advanced" link in the upper right.
Click on the tab for the features you want to view/change. Ie:
Once you have made the changes you want, press the "Submit All Changes" button.