User`s guide

Installation and First-Time Operation

■ Connecting your phone to the LAN

This phone communicates via the same connection as your PC (IP network / LAN). This means

you do not need a special phone connection. Ask your system administrator if you have any

doubts about your phone’s connection.

• Connecting the LAN cord (not included in the scope of delivery) to a LAN socket.

• Plug the connector at the loose end on the underside of the phone into the LAN socket.

• Desktop installation only: To relieve the strain on the cable feed the cable through one of the

cable guides on the stand rest.

■ Connecting the power supply

If your LAN supports Power-Over-Ethernet (PoE), the phone will be powered via the LAN cord

and you will not require a power adapter.

If your LAN does not support PoE or if you have installed a switch between the LAN and the

phone that does not support PoE, you will need the optional power adapter to power the

phone.

• Plug the round connector of the thin power cord on the underside of the phone into the

power socket.

• Desktop installation only: To relieve the strain on the cable feed the cable through one of the

cable guides on the stand rest.

• Connect the power supply to the mains.

■ Logging your phone on

Your system administrator has to prepare the system before you can log on your phone.

Note:

Only use the optional original plug-in power adapter.