User manual

27/1531-ANF 901 43 C 2014-01-12
Configuration Manual Cordless Phones DT4X3
1
1.3 Functionality matrix
The following matrix shows which functionalities that can be used by the different
handset and require settings via WinPDM/CPDM3.
2 Getting Started with Configuration of the Handset
It is possible to configure the handset by inserting it into a Desk PDM Charger or Rack
PDM Charger The charger is connected via USB to the WinPDM, or via Ethernet to the
CPDM3.
In the case of IP-DECT, it is possible to configure the handset over the air.
This chapter describes how to configure handsets in three different system setups:
• with WinPDM
• with Device Manager via chargers
• with Device Manager over-the air
Functions
DT413 DT423 DT433
Company phonebook x x x
Central phonebook x x x
Personalized menus x x x
Audio adjustment (mic gain etc.) x x x
Customizable ring signals x x x
Messaging (text size etc.) x x x
180 degrees rotation of message and call information x x x
Voice Mail x x x
Push Button Alarm - x x
Man-down and No-movement alarm - x x
Automatic Call after Alarm - x x
Acoustic Location Signal (ALS) - x x
Poll Location
1
1.Base Station Location must be enabled to use this feature.
x x x
Location, Base Station x x x
Base station encryption x x x
Push To Talk (PTT)
2
2.This function requires 3rd party conference unit
x x x
Upload Language x x x
Clear lists in charger x x x
Services x x x
Emergency call number x x x
Own/User headset profile x x x
PBX date format for absence handling x x x
DTMF settings for On-hook/PTT x x x
Own line settings x x x