User manual

27/1531-ANF 901 43 C 2014-01-12
Configuration Manual Cordless Phones DT4X3
42
SERVICE NEEDED
Hardware error
Note: This display message is
only shown in English.
There is a communication
problem between components
in the handset.
Restart the handset. If the
problem persists, send the
handset for service.
SERVICE NEEDED
Invalid IPDI
Note: This display message is
only shown in English.
Easy replacement procedure
not followed correctly or
failure during easy replacement
procedure.
Send the handset for service.
Enter PIN code Phone lock is activated. Enter the required PIN code. If
the PIN code has been lost,
enter a new PIN code via the
WinPDM/CPDM3 or do a
factory reset via the WinPDM/
CPDM3.
Battery low, charge now The battery level is low. Charge the handset, or replace
or charge the battery.
Phonebook is not available at
the moment.
The phonebook is not activated
or does not respond.
Try again later or if the fault
persists do a factory reset via
the admin menu or via the
WinPDM/CPDM3.
Note that it may take several
minutes for the phonebook to
be available if there are many
entries in Contacts and/or
company phonebook.
Voice mail number not defined There is no Voice mail number
defined in the handset.
Define a Voice mail number
via the WinPDM/CPDM3.
Could not encrypt connection The parameter "Encryption
Required" is enabled in the
handset in combination with;
1) Unencrypted base station(s);
and/or,
2) Unsupported base station(s).
1) Disable the "Encryption
Required" parameter in
handset; and/or,
2) Enable the encryption in the
base station(s); and/or,
3) Use supported base
station(s). Ask your supplier.
Not allowed 1) The handset with the shared
phone functionality enabled
cannot be logged in due to
another handset using the
extension (that is, User).
2) The extension (User) does
not exists.
3) The password is not correct.
1) Logout the handset using the
extension.
2) Make sure that you entered
correct extension. If needed,
contact the system
administrator.
3) Make sure that you have
entered correct password. Ask
the system administrator if you
have forgot the password.