User manual

27/1531-ANF 901 43 C 2014-01-12

Configuration Manual Cordless Phones DT4X3

Tip: It is recommended to use this feature if you want to create a message alert that

sounds like the equipment (for example a respirator) that generates an alarm..

Create Customized Sound

1 Select Settings > Custom Sounds > Custom Sound X (where X represent 1 -

10).

2 Set the following parameters:

• Label - The name of the custom sound (required). The name will be visible when

mapping the custom sound to a beep code later on.

• Melody - The text string represents a non-polyphonic sound. By default, example of

melodies are set for Custom Sound 1 - 7. See also Appendix A: Programming

Custom Sound on page 44.

• Beat - The tempo in beats per minute to be used when playing the sound.

• Style - The ratio of note to rest period to be used when playing the sound.

• Instrument - The instrument to be used when playing the sound.

Map Beep Codes to Customized Sounds

1 Select Sound and Alerts > Custom Message Alert

2 In the Beep code drop-down lists, select the customized sounds to be used for

respectively beep codes.

Enable Customized Sound

1 Select Settings > Sound and Alert.

2 In the Message alert drop-down list, select ‚"Custom sounds according to beep

code"‚

5.27 Services

From WinPDM/CPDM3, it is possible to configure up to 10 services that can be

reached from the Services menu. It is also possible to configure soft keys to reach

services quickly. A list of predefined functions are available such as Phone call, Send

message etc.

5.27.1 Add Service

1 Select "Services".

2 Select the service (1 - 10) to be configured.

3 In the Name field, enter the name of the service. It will be displayed in the

telephone.

4 In the Type drop-down list, select the function to be used.

Beep code sent from a system/application The handset plays:

Beep code 0 No message alert is played

Beep codes 1- 7 Corresponding Customized sound