User manual

27/1531-ANF 901 43 C 2014-01-12
Configuration Manual Cordless Phones DT4X3
32
5.26.1 Configure Message Alerts with Beep Codes
The handset can map beep codes sent from a system/an application to different
message alerts.
Beeps according to beep code
.
The handset will play the original message alerts that are mapped to the beep codes.
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select "Beeps according to beep code".
Enhanced beeps according to beep code.
The handset will play extended message alerts that are mapped to the beep codes.
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select ‚"Enhanced beeps according to beep
code"‚
Custom sounds according to beep code
The handset can play customized message alerts that are mapped to beep codes. The
message alerts must first be customized and then mapped to the beep codes.
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1- 6 1 - 6 beeps
Beep code 7 Siren
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1- 6 1 - 5, and 10 beeps
Beep code 7 Siren
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1 -3 1 - 3 beeps
Beep code 4 3 tones chime
Beep code 5 10 beeps
Beep code 6 Alarm sweep
Beep code 7 Siren