User manual

27/1531-ANF 901 43 C 2014-01-12
Configuration Manual Cordless Phones DT4X3
31
2 Set the following parameters:
• Label - The name of the custom sound (required). The name will be visible
when selecting the custom sound as ring signal later on.
• Melody - The text string represents a non-polyphonic sound. By default,
examples of melodies text string are set for Custom Sound 1 - 7. See also
Appendix A: Programming Custom Sound on page 44.
• Beat - The tempo in beats per minute to be used when playing the sound.
• Style - The ratio of note to rest period to be used when playing the sound.
• Instrument - The instrument to be used when playing the sound.
3 Select which custom sound to be used as ring signal by following the instructions
in 5.25.2 Set Ring Signal.
5.26 Messaging Settings
It is possible to configure how incoming messages shall be indicated and displayed in
handset. The parameters can be found at:
Settings > Sound and Alerts
• Vibrate alert
Determines if the handset shall vibrate when receiving incoming calls and
messages.
• Message alert
Determines the message sound for incoming messages. It is possible to select a
predefined melody (Message 1 - Message 7) or a beep code that represents a
certain sound. For more information on how to configure sounds with beep codes,
see 5.26.1 Configure Message Alerts with Beep Codes on page 32.
• Message alert during call
Determines if a message alert should be played when receiving a message during a
call.
• Message volume
Determines the message volume for incoming messages. By default, the message
volume follows the ring volume, but another message volume can be set with this
parameter.
• Vibrator for message during call
Determines if the handset shall vibrate when receiving messages during an ongoing
call. The Vibrate alert parameter must also be enabled if the handset shall vibrate
when receiving a message during the call.
Settings > Messaging
•Text size
Size of the message text when viewing and writing messages.
• Message List representation
Can be set to text or number.
Settings > Display
• Rotate display text
Determines if incoming messages shall be displayed upside down. This can be
useful if you wear the handset in a belt and want to read the message without
rotating the handset. When pressing any key, the messages will be displayed in the
normal way.
Note: This setting also affects how incoming calls shall be displayed.