User manual

27/1531-ANF 901 43 C 2014-01-12

Configuration Manual Cordless Phones DT4X3

5.19 Base Station Location

An approximate location of the handset is possible to sent along with an alarm. The

handset evaluates the field strength ratio of the individual radio Base Stations and

sends the best-rated Base Station ID to indicate an approximate location of the

handset.

In addition, a system can also request the Base Station ID regardless if an alarm is sent

or not. See 5.20 Poll Location on page 28.

Using the "Edit template" feature in the WinPDM, the parameter can be found at:

Location > Base station positioning

Note: The standby time for the handset will be lower when Base station location is

activated.

5.20 Poll Location

A system/application can request a location of a handset. When location of the handset

is requested, the handset sends its approximate location (Base Station positioning

enabled). If Base Station positioning is enabled, the handset sends the best-rated Base

Station ID together with the time since it was received. See also 5.19 Base Station

Location on page 28.

5.21 Site Survey Tool

See the User Guide for Site Survey Tool.

5.22 Common Alarm Settings

Note: This feature is applicable for DT423/DT433 only.

The parameters described in this chapter are applicable for all alarm types. See also

5.23 Push Button Alarm and 5.24 Man-Down Alarm and No-Movement Alarm for

additional parameter settings.

In a template or Number in WinPDM/CPDM3, the parameters for activation are found

at:

Alarm > Common

Parameters in the current version are:

• Password protect ALS

Determines if a password is required to turn off the ALS

• Number for automatic call after alarm

Determines which number the handset automatically shall call after an alarm is

sent.

5.23 Push Button Alarm

Note: This feature is applicable for DT423/DT433 only.