User manual

27/1531-ANF 901 43 C 2014-01-12

Configuration Manual Cordless Phones DT4X3

1 Select Customization > Phone restrictions

2 In the Prevent switch off handset drop-down list, select one of the following:

• Yes - The user will not be able to switch off the handset by pressing the On-hook

key.

• No - The switch off restriction is disabled.

5.14.3 Enable/Disable Call List

It is possible to prevent that the handset stores outgoing calls and incoming calls in the

Call list. This can be useful to prevent that an unauthorized person views the call list.

1 Select Customization > Phone restrictions

2 In the Possible to enable call list drop-down list, select one of the following:

• Yes - The handset will store the calls in the Call list

• No - The handset will not store any calls in the Call list

Note: Old incoming and outgoing calls (if any) will not be deleted in the Call list when

setting the parameter to No. It is recommended to clear all call lists (if any) to ensure

that no old calls are stored..

5.15 Actions when Handset Placed in Charger

•

5.15.1 Action when not in Call

The handset can be configured to perform an action when it is placed in a charger. The

selected action is only performed when no call is established. When the handset is

removed from the charger, it returns to previous settings.

1 Select Connections > In Charger

2 In the In charger action drop-down list, select one of the following:

• No action - no action will be performed when handset is placed in charger

• Switch off - the handset will be switched off when placed in charger

• Redirect - the handset will redirect all calls and messages when placed in charger.

NOTE: The destination number must be programmed in the PBX to be able to

redirect calls/messages.

• Change profile - the handset will change profile when placed in charger.

In the Change to profile drop-down list, select the profile to be used. By default, only

the profile Normal is selectable. If configured, additional profiles will be visible, see

5.34.1 User Profiles on page 36.

• Sound off - the handset will be silenced when placed in charger.

Note: Messages with breakthrough (for examples messages with high/alarm

priority) will not be muted.

5.15.2 In Charger Action when in Call

The handset can be configured to end a call, or turn on the loudspeaker when it is

placed in a charger during a call. If the handset is removed from the charger during the

call, it will not return to previous settings.

1 Select Connections > In Charger