User manual

27/1531-ANF 901 43 C 2014-01-12
Configuration Manual Cordless Phones DT4X3
23
5.9 In Call Menu
In Call menu is a configurable menu in the handset. The purpose of the In Call menu is
to provide a user friendly access to system dependent functionality during a call such
as:
• Start a new call during a conversation
• Switch between calls
• End a call
• Transfer a call
• Transfer to a new call
1
• Make a conference call
• Activate call back
• Sending call waiting
• Open Contacts (that is, Local phonebook and Company phonebook)
• Open Messaging menu
2
• Send DTMF
• Viewing DECT information
3
• Turning microphone on/off
3
The menu is described in the handset’s User Manual.
Note: It is also possible to configure own In call functions, see 5.9.1 Configure Own In
Call Functions on page 23.
Using the WinPDM and the "Edit template" feature, the parameters can be found at
Systems > System X > PBX Settings > In call functionality
Tip: Ask your supplier for example templates that will configure the in call menu for your
PBX.
5.9.1 Configure Own In Call Functions
Besides the default In call functions, it is possible to define 10 extra system specific call
services by codes. The codes can be programmed with digits 0-9, #, *, P – pause, H –
hook (auto disconnection),
1 Select Systems > System X > PBX Settings > In call functionality > General
purpose X
2 In the Name field, enter the name to be displayed in the In call menu.
3 In the Data field, enter the applicable code to be used for the function.
4 Click "OK" to save the settings.
Tip: Your supplier may have a template example that will configure the In call functions
menu for the PBX.
1.This option will be visible in the handset when the parameters "New call" and "Transfer" are set.
2.This option is always visible and cannot be disabled in handset.
3.This option will be visible in the handset when the Admin Menu is activated. See 6 Administration on page 38.