User manual

27/1531-ANF 901 43 C 2014-01-12

Configuration Manual Cordless Phones DT4X3

5 Handset Configuration

Note: This chapter describes settings in parameter definition files (.def). These files are

regularly updated and settings may change slightly. For example "On" to "Enable" or a

parameter can be moved to another directory.

5.1 Configure a Handset with a Template

Note:Ask your supplier for example templates valid for your telephone and your PBX

A template contains one or more parameter settings. By using a template, the same

configuration can easily be applied to many handsets simultaneously. Templates are

also an efficient way to give good control over which changes that are applied to each

handset.

Templates enables configuration of all aspects of a handset from sound volume to

keypad short cuts.

5.1.1 Create a template

1 Open the WinPDM or the Device Manager in the CPDM3.

2 In the Templates tab, select Template > New. The Create Template window is

opened.

3 Select the device and parameter version that matches the software version

installed on the handset. Give the template a descriptive name.

The parameters that are not part of the template will be left unchanged on the

handset.

The parameter version of an installed handset is visible under the Numbers tab

or the Devices tab.

4 Select the checkbox of each parameter that you want to be part of this template

and enter the proper value.

5 Click "OK" to save your template.