User manual

27/1531-ANF 901 43 C 2014-01-12
Configuration Manual Cordless Phones DT4X3
16
Configuration. This setting is applicable for handsets used in different regions of the
world. For example for users working on a ship that visits different countries.
When the frequency band is set to "Multifrequency", the handset will adopt to the
applicable frequency band (EU, US or Brazil) used in the specific region after it has
been restarted.
NOTE: The handset will adopt to the frequency band configured in the DECT system.
The recommended procedure when changing frequency band is as follows:
1 The site administrator sends out broadcast message to all handsets informing
that the handsets need to be restarted at a specific time.
2 The site administrator enters IP-DECT master and change setting for the
frequency and carriers just before the specific time.
3 All handset users restart their handsets.
After the restart the handsets have changed to the applicable frequency band (EU, US
or Brazil).