User manual

27/1531-ANF 901 43 C 2014-01-12
Configuration Manual Cordless Phones DT4X3
12
4.3 Perform a Factory reset
When a factory reset is done on a handset, all configuration settings will be restored to
default values, PBX subscriptions will be removed and all data are removed. This
includes contacts, messages etc. The software will be left intact.
Factory Reset using WinPDM
1 In WinPDM, click the Device tab and mark the handset to be factory reset. Note
that the handset must be online.
2 In the Device menu, select "Factory reset". Alternatively, right-click the handset
and select "Factory reset".
3 A Reset devices dialog appears, click "Yes". The handset will be restarted.
Factory Reset using Handset
It is possible to factory reset a handset from its Admin menu.
1 To activate the Admin Menu, enter the Call time screen and press > * < < * <.
2 Select "Factory Reset".
3 A Reset portable? dialogue appears, press "Yes". The handset will be restarted.
4.4 Replacement procedure choice guide
Depending on situation, two different replacement procedures can be chosen;
replacement via WinPDM/CPDM3 and Easy Replacement. Use the following list as a
guide to choose which procedure to use.
• If a handset needs to be replaced due to for example a broken display, see
corresponding handset’s User Manual.
• If the electrical connection is damaged, it might not be possible to follow the Easy
Replacement procedure. Depending on fault, it might work to do a replacement via
WinPDM/CPDM3, see 4.5 Replacement of handset with the Device Manager on
page 12 or 4.6 Replacement of the handset with WinPDM on page 14.
• If two handsets and their settings shall be switched between two users, follow 4.5
Replacement of handset with the Device Manager on page 12 or 4.6 Replacement
of the handset with WinPDM on page 14.
4.5 Replacement of handset with the Device Manager
Both the old handset and the new handset must be of the same device type (DT413,
DT423 or DT433). The same extension number is assigned to the new handset.
Make sure that the old handset is saved in the CPDM3. Start the Device Manager in
the CPDM3 and navigate to the "Numbers" tab. There shall be a tick in the "Saved"
column for the old handset.
If the handset is not saved, insert it into a desktop charger or charging rack connected
to CPDM3 and perform a save, see the CPDM3’s Installation and Operation Manual.
Device
Manager
Max. 10 simultaneous downloads (max. 20 when using an external
web server).