User guide

1424-EN/LZT 103 089 A3 2012-02-23
User Manual
Cordless Phones for MX-ONE™
88
A.8 Transfer a call
A.8.1 Transfer a Call to the Handset
To transfer a call to the handset from the Bluetooth headset, press "More" on the handset during
the call, and select “Audio transfer”.
If supported by the headset, it is also possible to transfer a call to the handset with by pressing
the headset button.
A.8.2 Transfer a Call to the Bluetooth Headset
To transfer the call to the Bluetooth headset, press "More" on the handset during the call, and
select “Audio transfer”.
It is also possible to transfer a call to the Bluetooth headset by pressing the button
20
on the
Bluetooth headset.
A.9 Switch to a Headset with Cord
If a headset with a cord is connected during a call, the call is transferred to this headset
automatically.
A.10 Menu Tree
See 8.8 Settings on page 61.
A.11 Operation Notice
A.11.1 Accessibility and Voice quality
Bluetooth uses the frequency of 2.45 GHz. WLAN, microwave oven, and other devices that use
the same frequency can disturb the use of a Bluetooth headset.
A.11.2 Operation Area
Maximum distance between the headset and the handset is 10 metres. The communication
distance between the handset and headset may vary considerably due to the environment and
disturbances from other 2.45 GHz equipment. Different headsets can also give different
communication distances.
A.11.3 Out of Range
If a connection cannot be made with the selected Bluetooth headset, the call is transferred
automatically to the handset.
If the Bluetooth headset and the handset get out of range from each other, the connection is
temporarily lost. Since the last connected headset is always considered "selected", the
connection is automatically established again when a call is made or received. In case of more
than one paired headset in list, the preferred headset used for calls, is always first in list.
20. For intruction, see the headset manual.