User guide

1424-EN/LZT 103 089 A3 2012-02-23
User Manual
Cordless Phones for MX-ONE™
71
Note: This is used in combination with system set to be "Automatic", see Change System on
page 69.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "System".
4 Select "Priority".
5 Change the priority if needed by selecting "Up" or "Down". The priority will be saved
when "Back" is selected.
8.9.4 In Charger Action when in Call
It is possible to determine actions to be performed when a handset is placed in charger during a
call.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "In charger".
4 Select "Call behavior".
5 Select one of the following:
• No action - no action will be performed when handset is placed in charger during a
call.
• Loudspeaking - The loudspeaker will be activated when handset is placed in charger
during a call.
• End call - The call will be disconnected when handset is placed in charger.
8.9.5 In Charger Action when not in Call
It is possible to determine actions to be performed when a handset is not in call and placed in
charger.
Note: Additional In charger actions can also be configured, see the handset’s Configuration
Manual.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select “In charger”.
4 Select "Other actions".
5 Select one of the following:
• No action - no action will be performed when handset is not in call and placed in
charger.
• Switch off - When the handset is placed in the charger it will switch off. When it is
removed from the charger it will switch on again.
• Sound off
17
- When the handset is placed in the charger it will be muted. When it is
removed from the charger it will switch on the sound again.
• Redirect - Calls can be redirected to another extension when the handset is placed in
a charger. This function must be programmed in the PBX to be able to redirect calls.
• Change profile - when the handset is placed in the charger it will change profile.
When the handset is removed from the charger, the profile is changed back.Press
"Edit" and select the wanted profile. By default only the profile Normal is selectable,
17.If the parameter Disable permanent mute is enabled in WinPDM, the handset will not be muted in charger.