User guide

1424-EN/LZT 103 089 A3 2012-02-23
User Manual
Cordless Phones for MX-ONE™
70
2 Select in the menu.
3 Select "System".
4 Select "Subscribe".
5 The handset’s IPDI is displayed. The IPDI is a unique code that has been assigned to the
handset. Press "Next".
6 Enter System name (optional). If no system name is entered, the default name will be
used. That is System A, System B etc. depending on which system name that is free.
Note: The System name might not be displayed depending on the handset’s Display
Management Layout setting. See the handset’s Configuration Manual.
7Press "Next".
8 Enter PARK code (max. 31 digits). The PARK code may not be needed if there is no
alien DECT system within the coverage area.
9 Enter AC code. The AC code length must be between 4 - 8 digits.
10 Press "Next".
11 An information text "Protection on?" is displayed. Select "Yes" if the new system is to be
protected. It is not possible to delete a protected subscription from the System menu
16
.
12 Press "OK". A searching mode starts.
Unsubscribe System
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "System".
4 Select "Unsubscribe".
5 Select the system to unsubscribe.
6 Press "Yes to unsubscribe the system.
Rename System
It is possible to change the name of the system in the handset.
1 Enter the menu by pressing the “Menu” soft key.
2 Select in the menu.
3 Select "System".
4 Select "Rename System".
5 Select system to rename.
6 Enter new name.
7 Select "Save".
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible to set
the systems in priority by moving them up or down in the list.
16.It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the Admin
menu or the DECT system.