User guide

1424-EN/LZT 103 089 A3 2012-02-23
User Manual
Cordless Phones for MX-ONE™
69
7 Select "Add new". A Put headset in Pairing mode dialog window is displayed.
8 Press "OK". It will now search for a Bluetooth headset for connection.
9 When headset is found, press "Pair".
10 If needed, enter PIN code, see user manual for the Bluetooth headset. Press "OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset will also be connected indicated by the icon in front of the headset.
Tip: It is possible to configure the headset button with a specific function, such as post-dial, dial
last called number, or dial a predefined number. See the handset’s Configuration Manual for
more information.
8.9.2 Headset
In order to achieve optimal audio quality with the different headset types, it is recommended to
select the corresponding headset type.
The default setting is microphone on a boom, that is, the audio is optimized for using a headset
with microphone on a boom. The headset type can be changed in the menu by doing as follows:
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Headset".
4 Select the corresponding headset type from list, that is, "Mic on boom", or "Hearing
protection". Additional headsets
15
might be visible in the list.
5 Press "Select".
Tip: It is possible to configure the headset button with a specific function, such as post-dial, dial
last called number, or dial a predefined number. See the handset’s Configuration Manual for
more information.
Note: When Bluetooth is disabled and having an active call in loudspeaker mode on an
intrinsically safe handset, the audio will not be transferred to the headset when connecting it.
IMPORTANT: The headset Microphone on a boom is not available as accessory for the
intrinsically classified handset. If used, it is NOT permitted to use the headset in hazardous
areas.
8.9.3 System
The handset can subscribe up to eight different systems.
Change System
Select “Automatic” or a specific system. If the handset is set to “Automatic”, it selects a system
according to the priority list, see Priority on page 70.
Subscribe System
To subscribe a system, the “Park:” (Portable Access Right Key) and “Ac:” (Authentication
code) related to the system are needed. Contact the system administrator for more information.
Note: The PARK code may not be needed if there is no alien DECT system within the coverage
area.
1 Enter the menu by pressing "Menu".
15.Only visible if a headset profile has been configured in the PDM.