User guide
1424-EN/LZT 103 089 A3 2012-02-23
User Manual
Cordless Phones for MX-ONE™
44
8.1.7 Call a PTT Group
Note: PTT group(s) must be defined in the PDM and Messaging Group(s) in CPDM3 to be able
to use this function. See the handset’s Configuration Manual, and Installation and Operation
Manual for CPDM3.
1 Press "Menu".
2 Select in the menu.
3 Select "PTT groups"
8
.
4 Select PTT group.
5 Press "Call", or .
TIP: Alternatively, when in idle mode, press quickly, select PTT group, and press
8.1.8 Re-join a Group
Re-join a Group from Call List
If a PTT invitation was received as a call and the user rejected or missed it, the PTT group can
be dialed from the Call list or Missed calls, respectively. The PTT invitation is indicated by the
icon in the list. See 8.1.1 Call List on page 40, or 8.1.2 Missed Calls on page 42.
8.2 Optional Call handling Services
These functions are system dependent and may not be available in your telephony system.
Besides the default Call services functions, it is possible to define 10 extra system specific call
services - with or without automatic disconnection. The parameters are set up in the WinPDM /
CPDM3. Please contact your system administrator.
8.2.1 Absence Handling
The reason for being absent and the return time can be specified here. If you are authorized, you
can also enter Absence information for another extension from your own extension.
1 Enter the menu by pressing the “Menu” soft key.
2 Select in the menu.
3 Select "Call services".
4 Select "Absence"
9
.
5 Select the applicable absence reason in the list. The number of absence reasons (for
example “Lunch”, “Meeting”, “Trip” etc.) are configured in the WinPDM(CPDM3.
6 Press "Select.
7 Enter time (HHMM) or date (MMDD) depending on the selected absence reason.
8 Press "OK".
The handset sends an absence reason code to the system by establishing a call. The call will
automatically be disconnected after a few seconds.
Note: The following procedure can also be used: Press*23* enter the Absence code (0-9) Press
*, enter time or date of return (MMDD/HHMM), if requested, Press # and press and ,
(U.S and Canada, Press *24*).
8.Only available if PTT group(s) is defined in handset via PDM.
9. Only visible if absence reason codes are defined in handset via PDM/CPDM3.