User guide

1424-EN/LZT 103 089 A3 2012-02-23

User Manual

Cordless Phones for MX-ONE™

6.3.12 Conference Call

Prerequisite,

a new call has been started during conversation, see 6.3.5 Start a New Call during

Conversation on page 34.

By initiate a conference call, an conversation can be made between several participants

simultaneously.

1 Press "More" during the call.

2 Select "Conference call".

Press "Select".The person initiating the conference call is the conference leader, and the other

are participant members of the conference call.

Note! If Conference does not appear when you press "More", you can also do the following to

establish a conference: Press R, dial the number to include, and press 3.

6.3.13 Call Waiting

During an ongoing conversation and a short tone for another incoming call appears, do as

follows:

1 Press "More".

2 Select "Call waiting"

3 Press "Select". The new call is now connected, and the first call is on hold.

Note: If Call Waiting is not programmed and does not appear when you Press "More", you can

Press 5 to activate. ( France and new Zealand, Press 6; Sweden, Press 4)

6.3.14 DTMF

Some systems/PBXs require that the handset sends Dual Tone Multi Frequency (DTMF) when

pressing the keys. DTMF can be enabled as follows:

1 Press the soft key "More" during the call.

2 Select "DTMF".

3 Press "Select". This will enable the use of DTMF.

Tip: It is also possible configure the handset to send DTMF when pressing and pressing/

releasing See the handset’s Configuration Manual.

6.4 DECT InfoThis submenu is only visible if the Admin menu is activated. See handset’s

Configuration Manual.

Loudspeaking Function

There are several options to activate the loudspeaking function:

• When receiving a call, press the left soft key .

• During a call, press the left soft key .

• This function can also be activated by selecting another answering method, that is,

"Automatically" and/or "Loudspeaking". See 8.8.5 Answering on page 66.