User guide

1424-EN/LZT 103 089 A3 2012-02-23
User Manual
Cordless Phones for MX-ONE™
35
3Press
Wait for the call timer to start in the display.
4 Press .to finish the procedure
Cancel all callbacks:
1Press #37# (U.S. and Canada, Press #6#)
2Press
Wait for the call timer to start in the display
3 Press to finish the procedure.
6.3.8 Switch between Calls
Prerequisite,
a new call has been started during conversation, see 6.3.5 Start a New Call during
Conversation on page 34.
1 Press "More" during the call.
2 Select "Switch".
3 Press "Select" to switch to the other call. The first call is on hold.
If needed, repeat the steps above to switch between the calls.
6.3.9 End a Call
Prerequisite,
a new call has been started during conversation, see 6.3.5 Start a New Call during
Conversation on page 34.
1 Press "More" during the call.
2 Select "End Call".
3 Press "Select". This will end the current call and the previous call is resumed.
6.3.10 Transfer a Call
Prerequisite,
a new call has been started during conversation, see 6.3.5 Start a New Call during
Conversation on page 34.
When a caller has two ongoing calls, he/she can transfer the first call to the second call.
1 Press "More" during the call.
2 Select "Transfer".
3 Press "Select" to transfer the current call to the other call.
6.3.11 Transfer to New Call
An ongoing call can be transfered to a new number. When the new call is established, the caller
that initiated the transfer will be disconnected.
1 Press "More" during the call.
2 Select "Transfer to new call"
5
.
3 Press "Select".
4 Enter the number to the person the ongoing call will be transfered to.
5 Press to transfer the call.
5.Only visible when the parameters "New call" and "Transfer" are defined in the PDM.