User guide

1424-EN/LZT 103 089 A3 2012-02-23
User Manual
Cordless Phones for MX-ONE™
32
3 Select "Call contact".
The local and company phonebook appears in the same list, but the company names are
indicated by a icon in front of the name. Select contact from list, or search name/
number by entering characters and select search.
4 Press the soft key "Call" or to make the call.
6.2.9 Dial a Name from the Central Phonebook
1 Open the menu by pressing the "Menu" soft key.
2 Select .
3 Select "Central phonebook".
4 Select "Search by name".
5 Enter the first name and/or last name, the whole name does not have to be entered.
Press “Search”.
6 Press "Call", or to make the call.
7 Press "Call", or to make the call.
6.2.10 Number Presentation Restriction
If you do not want your name and number to be displayed to the person you are calling, Do the
following:
Note: This function can be blocked for use on your extension (programmed by System
administrator).
1Press *42# and
Wait for the dial tone
2 Dial the number
Instead of the name and number, the display on the called phone shows Anonymous
6.2.11 Last External Number Re-dial
When you make an external call, the system automatically stores the number dialed, regardless
of whether the call was successful or not.
To re-dial the last external number dialed:
1 Press *** and (Finland and Sweden **0)
6.3 During a Call
Note: Some of these functions are system dependent. The parameters are set up in the Portable
Device Manager WinPDM/CPDM3, see the handset’s Configuration Manual, and Installation
and Operational Manuals for WinPDM and CPDM3.
If the handset is configured via WinPDM/CPDM3, it is possible to call a predefined emergency
number while the handset/keypad is locked. When calling from a locked handset, it is only
possible to access the Microphone on/off function by pressing the soft key "More". However,
the entire In Call menu is accessible when calling from a handset with locked keypad.