User guide

Alarm
DT412/DT422/DT43298
Alarm
Note: The Alarm features are only available for the
DT422 and DT432 phone.
When you work alone and at risk, your personal safety is
important. For situations like this, the DT422 and DT432 phones
are equipped with a red Alarm key on top. When you are in
trouble, just press the Alarm key to summon help by sending a
preset message to the alarm central, which distributes it (requires
an external alarmserver).
Note: The Alarm features may be restricted or not
available. Ask the system administrator for the availability
and for more information.
Alarm with data
Additional data for example a location code, can be sent along
with an alarm. The data must manually be programmed by you.
To use the function, one Soft/Hot key must be defined as a short
cut to the menu Edit alarm data, see section “Hot keys and Soft
keys” on page 107. The stored data is added to all types of alarm
at transmission.
Automatic call after an alarm
The phone can be programmed to call a predefined phone
number directly after an alarm. One Hot key must be
programmed with the specific phone number, see section “Hot
keys and Soft keys” on page 107. It can be any external or
internal phone number but also a pre-defined group of phones.
The phone can be configured to call the same number for all
types of alarms or to call different numbers depending on the
alarm type.