User guide

Outgoing Calls

DT412/DT422/DT43238

Notes:

Correct a wrong entry by pressing

(see display). If you

decide not to make the call while keying in the number,

press

(see display) to stop.

It is possible to turn on/off the tone sender in a predialed

number by making a long press on the

* key (e.g. when

calling telephone banks). Tone sender on will be indicated

with a

in the number, and off with

. If a pause is required

in the number, it is added by making a long press on the

# key. The pause is indicated with a

in the number.

You can make your calls faster by programming Soft/Hot

keys with frequently used numbers. See section “Program

a Hot key or a Soft key with a phone number” on

page 109.

If you receive a queue tone when the digit or digits to get

an external line are dialed (if the feature Least Cost

Routing is used in the system), keep waiting. Once a line

becomes free you will receive a dial tone. If a warning

tone is heard, the selected line is marked “Expensive”.

Off-hook dialing

If you prefer to dial a number off-hook:

æ Press.

Dial tone.

å Key your number on-line.

Notes:

When dialing this way, you cannot press

(see display) to

erase digits.

The number is not

stored in the Call list.

Off-hook dialing is not supported by IP DECT.

Handsfree

While you are waiting for a connection, dial tone or during the

call:

ä Press the middle Soft key.

You are connected to the caller via the loudspeaker and

microphone.