User guide

Settings
DT412/DT422/DT432108
Activate a function or number with a preprogrammed Soft
key or a preprogrammed Hot key
Absent Press the preprogrammed Soft key (see display),
The pre-set function will be activated, in this example Absent.
or
å press and hold the preprogrammed Hot key.
A number between 0 and 9. The pre-set function will be
activated.
Available functions
Data send - See section “Send mobile data” on page 88.
Data with prefix - See section “Send mobile data” on page 88.
Phone call - You program a key with a name and a number.
Short-cut - A short cut to any of the following functions:
• Absent - See section “Absent” on page 86.
• Local phonebook - See section “Phonebook” on page 51.
• Central phonebook - See section “Phonebook” on page 51.
• Services - See section “Services” on page 103.
• Switch off - See section “Switching On/Off” on page 29.
• No-movement Alarm *
• Man-down Alarm *
• Edit alarm data *
• Change system - See section “Change system” on page 117.
• Demo Mess 1
• Demo Mess 2
• RSSI
* Only available for the DT422 and DT432 phones. See
section “Alarm” on page 98.
SMS - See section “SMS (Short Message Service)” on page 87.
Change mode - See section “Change modes” on page 102.
Not used - If you do not need a function or a phone number any
longer, you can set the key to Not used.