User guide

15BusinessPhone – Ericsson Dialog 4425 IP Vision
Log On / Log Off
Log On / Log Off
To log on
After your phone has been installed and powered up, the following
log on screen will be displayed:
Note: The Dialog 4425 IP Vision is powered by the LAN
connection or optionally via an external 24 volt AC/AC
adapter. If the telephone is powered by the LAN, no
additional power adapter is needed.
The LAN (or the external power adapter) must be
connected to the telephone before use. If the power
connection fails, your IP phone will not work.
z Log on Enter your extension number and press (see display).
If you have logged on using this telephone before, the extension
number used at the previous log on is displayed. In this case, you
do not have to enter your extension number; just press Log on to
go ahead.
z Log on Enter your Password and press (see display).
If you do not know your Password or extension number or a screen
other than the log on screen is displayed, contact your system
administrator.
Settings CallList PhoneBook
User not logged on! 12:46 12 May 2003
Enter extension number: 9318
Erase Log on
Settings CallList PhoneBook
User not logged on! 12:46 12 May 2003
Enter password: ***
Erase Log on