User guide

OpenMobility Locating Application

SOS – a handset user presses a button

The DECT handset user presses a button to signal an alarm condition. The SOS

automatically triggers a phone call to the operator. The operator who is using the

OM Locating application is able to locate the current position of the DECT handset

user.

ManDown – a person looses consciousness

The DECT handset sensor detects “ManDown” and the handset automatically sets

up a call in the hands-free mode. The operator who is using the OM Locating appli-

cation answers the call and gets the locating information from the application. If

the handset owner does not respond, the operator may initiate a locating alarm to

request help. The alarm forces the handset to generate a specific audible signal

which helps to find the handset owner.

Other Valid Documentation

This user guide describes installation, administration, and usage of the

OM Locating application. Please observe also the information given in the docu-

mentation to other parts of your OMM SIP-DECT installation:

■ Compendium: OpenMobility SIP-DECT Solution

Gives a general overview of the SIP-DECT solution.

■ SIP-DECT: OM System Manual

Describes installation, administration, and maintenance of a SIP-DECT system.

■ SIP-DECT: OM Integrated Messaging & Alerting Application

Describes messaging features and the integrated messaging solution.

■ SIP-DECT: OM Handset Sharing & Provisioning

Describes the enhanced user and handset management features and the OM

handset provisioning concept.

■ SIP-DECT: OM User Monitoring

Describes how to use the OM monitoring capabilities on DECT handsets

■ SIP-DECT: Aastra 600 c/d Messaging & Alerting Applications

Describes the messaging features specific to the Aastra 600 c/d DECT handsets.

■ Aastra 600 c/d series SIP-DECT® User Guide

Describes using the Aastra 600 c/d DECT handsets on the SIP-DECT system.

Scope of Delivery

The following components are included in the scope of delivery: