User guide

Settings
Dialog 4422 IP Office88
Change ring signal for a Monitoring key
The Monitoring keys are programmed by your system
administrator, however you can change the type of ring signal from
your phone. See also section “Ke
y Monitoring” on page 74.
Change the type of ring signal
Settings Ô Press.
The
Function Keys menu or the Programmable Keys menu is
framed.
Press.
Ô Press the Monitoring key to program.
The extension number of the phone t
hat is monitored is shown
together with the current type of ring signal for the key.
Monitored number: 3223
Periodic
ì
Press (+) to change.
Silence
Periodic
ì Press to change between the ring signals.
• Silence.
• Periodic (repetitive) ring signal.
• Delayed periodic ring signal.
• One muted ring signal. Only one
ring signal with a low level.
• One muted delayed ring signal.
Note: The Clear key can be used t
o leave the menu without
saving the changes.
Press to store the framed ring signal.
Press to return to the previous menu,
or
Settings
ÕÔ press to return to idle mode.