Specifications

Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
INSTALLING A5000 SERVER (Non-redundant)01/2011 Page 463
6 Configuring service start
In case of A5000 Server/AM7450 cohabitation (see phase 3, configuring AM7450
cohabitation), the TMA service does not appear in the menu below.
The status of the FTP, TMA and DHCP services can be modified so they may or may not
be started automatically. If a service is not configured to start automatically, the menu
Telephony service > System > Configuration > AMP services is used to start them
manually later.
The FTP service is used to download via TMA the firmware and configuration files used
by Aastra terminals 53xxip and 67xxi and the terminals used by Aastra terminals 53xx.
Refer to the document Installation manual Aastra 53xxip and Aastra 67xxi Aastra 53xx
sets - AMT/PTD/TR/0014 .
The TMA service is used by TMA, and to manage IP and TDM terminals. Refer to the
document Installation manual Aastra 53xxip and Aastra 67xxi Aastra 53xx sets - AMT/
PTD/TR/0014 . The TMA service configuration is accessible via the AMP terminal service
menu.
The DHCP service allows a lease to be automatically assigned to Aastra terminals 53xxip
and 67xxi and negotiates with them the standard and specific parameters required to
configure them. Refer to the document Installation manual Aastra 53xxip and Aastra
67xxi Aastra 53xx sets - AMT/PTD/TR/0014.
• If the answer is YES, "y", the screen below can be used to modify the value of the FTP,
TMA and DHCP fields. The values entered must be 0 (automatic service start) or 1
(manual service start via AMP).
• Validate the modifications with the "Return" key, after confirming or rejecting them by
pressing "y" or "n".
AASTRA 5000 CONFIGURATION / SERVICES
AN EXISTING CONFIGURATION WAS FOUND
*-------------------------------------------------*
| FTP : 0 |
| TMA : 0 |
| DHCP : 0 |
*-------------------------------------------------*
DO YOU WANT TO CHANGE CONFIGURATION Y(ES)/N(O) ?