Specifications

Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Maintenance 01/2011 Page 425
Table 12:
OPERATION DETAILS OF THE OPERATION / COMMENTS
• Check the compliance of
the new fuses.
See Tableau 7.5 .
• Insert the new fuses in the
fuse holder.
• Refit the fuse holder in its
slot, on the front panel of
the power supply module.
• Connect the cables. • Disconnect the mains cable, and if appropriate the backup
battery connector:
- on the front panel of the power supply module (AXL)
- at the back of the cabinet (AXS and AXS12).
• Power on the iPBX. • If it is an iPBX with multiple cabinets, first power on the power
supply module for the expansion cabinets ("I/O" switch on "I").
• Power on the power supply module of the main cabinet (“I/O”
switch on “I”).
• Check the status of the
indicators on the front
panel.
Refer to Section 4, Description des sous-ensemblesError! No
bookmark name given.